TE Connectivity, DuraSeal Butt Splice Connector, Red, Insulated, Tin 22 AWG
- N° de stock RS:
- 533-673
- Référence fabricant:
- DS-18-22-RS
- Fabricant:
- TE Connectivity
Offre groupée disponible
Sous-total (1 paquet de 50 unités)*
33,60 €
(TVA exclue)
40,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 950 unité(s) expédiée(s) à partir du 17 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 50 - 200 | 0,672 € | 33,60 € |
| 250 - 1200 | 0,618 € | 30,90 € |
| 1250 - 2450 | 0,551 € | 27,55 € |
| 2500 - 4950 | 0,504 € | 25,20 € |
| 5000 + | 0,471 € | 23,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 533-673
- Référence fabricant:
- DS-18-22-RS
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Splice Type | Butt | |
| Product Type | Splice Connector | |
| Overall Length | 36mm | |
| Diameter | 3.7mm | |
| Minimum Wire Size AWG | 18AWG | |
| Insulation | Insulated | |
| Maximum Wire Size AWG | 22AWG | |
| Colour | Red | |
| Insulation Material | Nylon | |
| Series | DuraSeal | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Splice Type Butt | ||
Product Type Splice Connector | ||
Overall Length 36mm | ||
Diameter 3.7mm | ||
Minimum Wire Size AWG 18AWG | ||
Insulation Insulated | ||
Maximum Wire Size AWG 22AWG | ||
Colour Red | ||
Insulation Material Nylon | ||
Series DuraSeal | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
- Pays d'origine :
- MX
Red 22 → 18 AWG
Features and Benefits:
Colour is red - colour coded for easy identification of gauge sizes
Maximum wire size 1.5mm Dia.
0.5 to 1.0mm² CSA
Resistance to moisture and abrasion
Strain relief
Protection from wire pull out
Easy to install
Materials:
Insulative sleeve - polyamide with thermoplastic adhesive coating inside
Crimp splice – Tin plated copper alloy
Base metal – Copper
Applications:
These splice connectors are designed to splice tin plated or bare copper stranded wires with an insulation rated for at least 85 degrees C. Can be found in areas such as:
Automotive
Commercial wiring
Marine electronics
Splices
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed