TE Connectivity AD Crimp Tool Crimp Tool for DuraSeal Splices

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

315,18 €

(TVA exclue)

381,37 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 31 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 18 unité(s) expédiée(s) à partir du 29 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +315,18 €

*Prix donné à titre indicatif

N° de stock RS:
864-6900
Numéro d'article Distrelec:
304-02-521
Référence fabricant:
AD-1522-1-CRIMPING-TOOL
Fabricant:
TE Connectivity
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

TE Connectivity

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

DuraSeal Splices

Series

AD

Overall Length

228.6mm

Adjustable Ratchet

No

Standards/Approvals

No

Minimum Wire Size mm²

0.3

Minimum Wire Size AWG

22AWG

Maximum Wire Size AWG

10AWG

Maximum Wire Size mm²

5

Statut RoHS non applicable

Pays d'origine :
US

TE Connectivity AD-1522-1 Hand Crimping Tool for DuraSeal Splices


The Importance of a High-Quality Crimp


When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

TE Connectivity DuraSeal Handing Crimping Tool - Overview


From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials for crimping DuraSeal crimp splices onto wire. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved.

Key Features and Benefits


• Easy to use with a smooth operation

• Pre-set crimp depth ensures crimp integrity

• Ratchet controlled release mechanism ensures full crimp cycle

• Crimping cavities are polished for maximum crimping reliability

• Ergonomic design for operator comfort

Questions and Answers


What terminals can this tool be used with?

This hand crimping tool is used for crimping DuraSeal splices with a wire size range from 22 to 10 AWG

What Kind of Crimp Does this Tool Produce?

This tool produces an open barrel style crimp

TE Connectivity Hand Crimp Tools for Splice Terminals


Liens connexes