RS PRO Crimp Tool Crimp Tool for Bootlace Ferrule

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

111,56 €

(TVA exclue)

134,99 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 14 unité(s) expédiée(s) à partir du 02 mars 2026
  • Plus 54 unité(s) expédiée(s) à partir du 02 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +111,56 €

*Prix donné à titre indicatif

N° de stock RS:
399-2031
Numéro d'article Distrelec:
304-03-209
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

Bootlace Ferrule

Height Safe

No

Overall Length

197mm

Standards/Approvals

No

Maximum Wire Size mm²

6

Maximum Wire Size AWG

10

Minimum Wire Size AWG

22

Minimum Wire Size mm²

0.5

Statut RoHS : Exempté

Pays d'origine :
SE

RS PRO Ratchet Crimping Tool


From RS PRO a durable, reliable and easy to use hand operated crimping tool made from high-quality hardened alloy steel. This hand tool consists of two handles with a non-slip ergonomic design for comfortable use, a ratchet mechanism, and a die assembly. This tool is front end feeding and creates a square crimp.

Ratchet Mechanism


The ratchet is pre-set to a specific force and remains locked until the handles of the tool are fully closed and the dies are bottomed. The handles cannot be opened until a full crimping cycle is achieved therefore preventing partial crimps. Once the cycle is complete the handles re-open. The ratchet also enables the operator to repeatedly produce consistent, high-quality crimps

This hand crimp tool also features a ratchet release trigger which, when pressed, releases the tool handle in the event of obstructions or miscrimps

Adjustable Crimp Force


This hand crimping tool features a cam that is used to adjust the crimping force. The cam locking bolt and washer are removed using an Allen key and cam is simply turned to either loosen or tighten the tool. Once the required setting is selected the cam washer and bolt are locked back into place

Features and Benefits:


• Durable and easy to use

• Made from high-quality hardened alloy steel

• Ratchet mechanism ensures that full crimp cycle is achieved

• Ratchet release mechanism

• Adjustable crimping force

• Ergonomically designed, non-slip handles for comfortable use

• Life span of 50000 cycles

Importance of a High Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

FAQS


What Terminals can this Crimping Tool be used with?

This hand crimping tool is designed for crimping bootlace ferrules with a wire size range of 0.5 sq mm to 6 sq mm.

Liens connexes