RS PRO RZR Crimp Tool for Wire End Sleeves

Voir l’ensemble des Crimp Tools

Sous-total (1 boîte de 1 unité)*

67,14 €

(TVA exclue)

81,24 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 209 unité(s) expédiée(s) à partir du 23 mars 2026
  • Plus 29 unité(s) expédiée(s) à partir du 23 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Boîte(s)
La Boite
1 +67,14 €

*Prix donné à titre indicatif

N° de stock RS:
136-6974
Numéro d'article Distrelec:
304-18-013
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Crimp Tool

For Use With

Wire End Sleeves

Series

RZR

Overall Length

180mm

Adjustable Ratchet

Yes

Standards/Approvals

CSA TEW, BS6231, EN 60454-3-1 Type 2, DIN 46228, VDE 1000V, UL style 1015, UL Nylon 66 94V-2, H07V2-K, H05V2-K, H05V-K, H07V-K

Maximum Wire Size mm²

16

Statut RoHS : Exempté

Pays d'origine :
DE

RS PRO VDE Crimping Pliers


RS PRO VDE crimping pliers for crimping wire end sleeves/ferrules from 0.25 to 16 mm² (DIN 46228 parts 1 + 4). This high-quality hand tool has marked half-round dies for reliable connections between the sleeve and the conductor. This RS Pro crimp tool has been designed for professional use with the highest attention to details. Wire end ferrules can be inserted easily from the side. Ergonomically designed handles guarantee safe, anti-slip and easy operation.

Features and Benefits


Overall height 180 mm

Weight 250 g

For cable terminals according to DIN 46 228 standards

Clamping Capacity 0.25 to 16 mm²

Ergonomic pliers

Strength-enhancing handle design

Compact and lightweight tool for professional use

Typical Applications

Crimping tools can be used for a variety of applications:-

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ’s:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Liens connexes