Allen Bradley 100S-C Contactor, 24V ac Coil, 3-Pole, 43 A, 7.5 kW 24V ac, 5 NO/2 NC, 525V ac

N° de stock RS:: 422-6587
Numéro d'article Distrelec:: 302-27-142
Référence fabricant:: 100S-C43KJ22C
Fabricant:: Allen Bradley

Allen Bradley 100S-C Contactor, 24V ac Coil, 3-Pole, 43 A, 7.5 kW 24V ac, 5 NO/2 NC, 525V ac

Visuel non contractuel

Sous-total (1 unité)*

359,56 €

(TVA exclue)

435,07 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	359,56 €

*Prix donné à titre indicatif

N° de stock RS:: 422-6587
Numéro d'article Distrelec:: 302-27-142
Référence fabricant:: 100S-C43KJ22C
Fabricant:: Allen Bradley

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Allen Bradley
	Coil Voltage	24V ac
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	525V ac
	Contact Current	43A
	Power Rating	7.5kW
	Series	100S-C
	Mount Type	Panel
	Function	Motor Control, Reversing
	Normal State Configuration	5 NO/2 NC
	Number of Auxiliary Contacts	4
	Auxiliary Contact Configuration	2 NO/2 NC
	Terminal Type	Screw
	Contactor Application	Direct-on-Line (DoL)
	Control Circuit Voltage Uc	24V ac
	Operational Current Ie	43A
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	CCC, CE, CSA, cULus, EAC, IEC, RoHS, UL
	Length	81mm
	Depth	140mm
	Width	54mm
	Pole and Throw Configuration	3P

	Sélectionner tout
	Marque Allen Bradley
	Coil Voltage 24V ac
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 525V ac
	Contact Current 43A
	Power Rating 7.5kW
	Series 100S-C
	Mount Type Panel
	Function Motor Control, Reversing
	Normal State Configuration 5 NO/2 NC
	Number of Auxiliary Contacts 4
	Auxiliary Contact Configuration 2 NO/2 NC
	Terminal Type Screw
	Contactor Application Direct-on-Line (DoL)
	Control Circuit Voltage Uc 24V ac
	Operational Current Ie 43A
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 60°C
	Standards/Approvals CCC, CE, CSA, cULus, EAC, IEC, RoHS, UL
	Length 81mm
	Depth 140mm
	Width 54mm
	Pole and Throw Configuration 3P

Statut RoHS : Exempté

Pays d'origine :: CH

Allen Bradley 3-Pole Safety Contactor, 24V AC Coil, 43A - 100S-C43KJ22C

Use this safety contactor from Rockwell Automation's Allen Bradley range to protect your high current devices. It's designed to let you remotely control current flow in machines that need switching on and off repeatedly, as this helps to prolong their lifespan. Its compact size means the unit takes up minimal space and is suitable for smaller applications. It's equipped with four (two normally open, two normally closed) positively guided auxiliary contacts to protect against current overload in powerful electric motors.

• Screw terminal for easy and reliable wiring• Protective cover to prevent tampering• Operating temperature between -25°C and +60°C for versatile use in industrial environments

Standards and Certifications

• IEC 947-5-1 (International Electrotechnical Commission)• DIN 19240 (Deutsches Institut für Normung)

What's the difference between a relay and a contactor?

The difference between a contactor and a relay is that a contactor handles high current load devices, while a relay can only manage small loads. In addition, you can use a contactor with single or 3-phase motors but you can only use a relay with single-phase motors.

100S-C, 3 Pole Safety Contactors 2N/O & 2N/C

Redundant contactors to isolate motor (hazardous motion)

Positively guided main contacts

Red contact housings for easy identification as safety device

Protective cover prevents manual operation - yet the window allows visible ON/OFF status

Safety Contactor

Note

DC versions incorporate a diode protection circuit