ABB GJL131 Contactor, 24V ac Coil, 3-Pole, 20 A, 5.5 kW 24V ac, 4 NO, 690V

N° de stock RS:: 253-4817
Référence fabricant:: GJL1311901R0101
Fabricant:: ABB

ABB GJL131 Contactor, 24V ac Coil, 3-Pole, 20 A, 5.5 kW 24V ac, 4 NO, 690V

Voir l’ensemble des Contactors

Sous-total (1 paquet de 5 unités)*

502,22 €

(TVA exclue)

607,685 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 23 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le paquet*
5 +	100,444 €	502,22 €

*Prix donné à titre indicatif

N° de stock RS:: 253-4817
Référence fabricant:: GJL1311901R0101
Fabricant:: ABB

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Coil Voltage	24V ac
	Product Type	Contactor
	Number of Poles	3
	Contact Voltage	690V
	Contact Current	20A
	Power Rating	5.5kW
	Series	GJL131
	Mount Type	DIN Rail, Wall
	Function	Reversing Contactor
	Normal State Configuration	4 NO
	Auxiliary Contact Configuration	1 NO/0 NC
	Number of Auxiliary Contacts	1
	Terminal Type	Screw
	Control Circuit Voltage Uc	24V ac
	Contactor Application	Control Unit
	Operational Current Ie	20A
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	55°C
	Standards/Approvals	UL 60947-4-1, UL 60947-1, IEC/EN 60947-5-1, IEC/EN 60947-4-1, IEC/EN 60947-1
	Length	46.7mm
	Width	96.2mm
	Depth	46.7mm
	Pole and Throw Configuration	3P

	Sélectionner tout
	Marque ABB
	Coil Voltage 24V ac
	Product Type Contactor
	Number of Poles 3
	Contact Voltage 690V
	Contact Current 20A
	Power Rating 5.5kW
	Series GJL131
	Mount Type DIN Rail, Wall
	Function Reversing Contactor
	Normal State Configuration 4 NO
	Auxiliary Contact Configuration 1 NO/0 NC
	Number of Auxiliary Contacts 1
	Terminal Type Screw
	Control Circuit Voltage Uc 24V ac
	Contactor Application Control Unit
	Operational Current Ie 20A
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 55°C
	Standards/Approvals UL 60947-4-1, UL 60947-1, IEC/EN 60947-5-1, IEC/EN 60947-4-1, IEC/EN 60947-1
	Length 46.7mm
	Width 96.2mm
	Depth 46.7mm
	Pole and Throw Configuration 3P

Datasheet - GJL1311901R0101

Pays d'origine :: DE

ABB GJL131 Series Contactor, 24V AC Coil Voltage, 20A Contact Current - GJL1311901R0101

This contactor is a reversing switching device designed for control of three-phase circuits in residential, commercial and industrial environments. It operates via a low-voltage control circuit and provides three-pole switching suitable for motor control and general-purpose load management within standard electrical installations.

Features and Benefits:

• 24V AC Coil enables compatibility with common control supplies
• Three-pole construction allows reversing motor control functionality
• 20A operational current supports moderate power motor loads
• 690V rated contacts permit use on higher-voltage systems
• Screw terminals ensure secure, maintenance-friendly connections

Applications

• Suitable for motor control in small industrial plants
• Ideal for reversing drives in commercial HVAC systems
• Used with building automation panels in residential complexes
• Can be used for switching resistive and inductive loads in control cabinets

What mounting options are available for installation?

It is designed for both DIN-rail and wall mounting to fit varied panel arrangements.

How does the auxiliary contact support control circuits?

A single auxiliary contact configured as one normally open contact offers a signal for interlocks or status feedback.

What environmental range should be considered for operation?

The device is rated to operate between -20°C and 55°C, suitable for typical indoor electrical environments.

How many main poles does it switch and what is the pole configuration?

It switches three poles arranged as a 3P configuration for three-phase circuit control.