ABB GJL121 Contactor, 60V dc Coil, 4-Pole, 20 A, 4 kW 60V dc, 2 NO/2 NC, 690V

N° de stock RS:: 253-4778
Référence fabricant:: GJL1213501R0003
Fabricant:: ABB

ABB GJL121 Contactor, 60V dc Coil, 4-Pole, 20 A, 4 kW 60V dc, 2 NO/2 NC, 690V

Voir l’ensemble des Contactors

Sous-total (1 unité)*

28,91 €

(TVA exclue)

34,98 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 06 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	28,91 €

*Prix donné à titre indicatif

N° de stock RS:: 253-4778
Référence fabricant:: GJL1213501R0003
Fabricant:: ABB

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	ABB
	Product Type	Contactor
	Coil Voltage	60V dc
	Number of Poles	4
	Contact Voltage	690V
	Contact Current	20A
	Power Rating	4kW
	Series	GJL121
	Function	Control Unit
	Mount Type	DIN Rail, Wall
	Normal State Configuration	2 NO/2 NC
	Number of Auxiliary Contacts	0
	Auxiliary Contact Configuration	0 NO/0 NC
	Terminal Type	Screw
	Minimum Operating Temperature	-20°C
	Operational Current Ie	20A
	Control Circuit Voltage Uc	60V dc
	Contactor Application	Control Unit
	Maximum Operating Temperature	55°C
	Width	52.5mm
	Length	46.7mm
	Depth	46.7mm
	Standards/Approvals	IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1, UL 60947-4-1
	Pole and Throw Configuration	4P

	Sélectionner tout
	Marque ABB
	Product Type Contactor
	Coil Voltage 60V dc
	Number of Poles 4
	Contact Voltage 690V
	Contact Current 20A
	Power Rating 4kW
	Series GJL121
	Function Control Unit
	Mount Type DIN Rail, Wall
	Normal State Configuration 2 NO/2 NC
	Number of Auxiliary Contacts 0
	Auxiliary Contact Configuration 0 NO/0 NC
	Terminal Type Screw
	Minimum Operating Temperature -20°C
	Operational Current Ie 20A
	Control Circuit Voltage Uc 60V dc
	Contactor Application Control Unit
	Maximum Operating Temperature 55°C
	Width 52.5mm
	Length 46.7mm
	Depth 46.7mm
	Standards/Approvals IEC/EN 60947-1, IEC/EN 60947-4-1, IEC/EN 60947-5-1, UL 60947-1, UL 60947-4-1
	Pole and Throw Configuration 4P

Datasheet - GJL1213501R0003

Pays d'origine :: DE

ABB GJL121 Series Contactor, 20A Operational Current, 60V Control Circuit Voltage - GJL1213501R0003

This contactor is a Compact switching device designed for controlling electrical loads across commercial, industrial and residential installations. It operates with a 60V DC control circuit to actuate four switching poles and is intended for installation where space-efficient switching and DIN‑rail or wall mounting are required.

Features and Benefits:

• 20 A rated contact current delivers dependable load-switching performance
• 690V contact voltage supports high-voltage distribution applications
• 4 kW power rating enables moderate motor and heater control
• 4‑pole configuration provides simultaneous multi‑phase switching
• Screw terminals allow secure, low-resistance conductor connections

Applications

• Suitable for automation panels requiring Compact multi‑pole switching
• Ideal for controlling small motors and heaters in light industrial environments
• Used with building management systems for residential and commercial loads
• Can be used for remote control of distribution circuits in control cabinets

What temperatures can it reliably operate within?

It is specified to function between -20 °C and 55 °C, accommodating typical indoor and sheltered outdoor electrical environments.

How is the unit mounted and secured in installations?

The device can be fixed on standard DIN‑rails or fastened directly to a wall for flexible panel layouts.

What safety and industry standards does it meet?

It conforms to IEC/EN 60947‑1, IEC/EN 60947‑4‑1 and IEC/EN 60947‑5‑1 and is recognised under the corresponding UL 60947 standards.

How many auxiliary contacts are provided and what is the normal contact state?

There are no dedicated auxiliary contacts fitted and the normal contact arrangement presents 2 NO and 2 NC positions.

What type of control and Terminal connections does it use?

The control circuit accepts a 60V DC Coil input and all connections are MADE via screw‑type terminals for reliable termination.