STMicroelectronics Discovery CMWX1ZZABZ-091 LoRa Development Kit for LoRaWAN 915 MHz B-L072Z-LRWAN1

Voir la catégorie

Sous-total (1 unité)*

43,57 €

(TVA exclue)

52,72 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Dernier stock RS
  • 4 restante(s), prêt à être expédié
  • Plus 17 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Unité
Prix par unité
1 +43,57 €

*Prix donné à titre indicatif

N° de stock RS:
134-5557
Numéro d'article Distrelec:
303-97-137
Référence fabricant:
B-L072Z-LRWAN1
Fabricant:
STMicroelectronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

STMicroelectronics

RF Technology

LoRa

Kit Classification

Development Kit

Product Type

Communication & Wireless Development Tool

Technology

LoRa, Ultra-low-Power STM32L0

For Use With

LoRaWAN

Featured Device

CMWX1ZZABZ-091

Kit Name

Discovery

Maximum Frequency

915MHz

Interface Type

SWD, USB

Standards/Approvals

No

STMicroelectronics Development Kit


The STMicroelectronics development kit is an RF discovery kit featuring the CMWX1ZZABZ-091 LoRa module from Murata. This module incorporates the SX1276 low-power transceiver, which features a long-range modem. This module supports high performance and OOK/FSK modulations. The transceiver is controlled by a STM32L072CZY6 microcontroller embedded in the module. This kit provides support for bi-directional end devices in class A and class C protocols and for end device activation, either via Over-The-Air Activation (OTAA) or via Activation-By-Personalization (ABP).

Features and Benefits


Frequency ranges between 860MHz and 930MHz

USB 2.0 FS

4-channel, 12-bit ADC, 2 x DAC

6-bit timers, LP-UART, I2C and SPI

Embedded SX1276 transceiver

14 dBm or +20 dBm selectable output power

157dB maximum link budget

Programmable bit rate up to 300kbit/s

High sensitivity: down to -137dBm

89dB blocking immunity

Fully integrated synthesizer with a resolution of 61Hz

Built-in bit synchronizer for clock recovery

Sync word recognition

Preamble detection

Board power supply through the USB bus or external VIN/3.3V supply voltage or batteries

3 x AAA-type battery holder for standalone operation

Fault-power LED

Applications


Wireless communication

Embedded systems

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

Liens connexes