Sous-total (1 unité)*
39,18 €
(TVA exclue)
47,41 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 25 unité(s) prête(s) à être expédiée(s)
- Plus 68 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 39,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 254-800
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Clamp | |
| Sub Type | Toggle Clamp | |
| Jaw Opening | 70mm | |
| Jaw Depth | 12mm | |
| Holding Force | 200daN | |
| Finish | Chrome | |
| Material | Mild Steel | |
| Standards/Approvals | No | |
| Width | 36mm | |
| Series | GH | |
| Length | 92mm | |
| Height | 42mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Clamp | ||
Sub Type Toggle Clamp | ||
Jaw Opening 70mm | ||
Jaw Depth 12mm | ||
Holding Force 200daN | ||
Finish Chrome | ||
Material Mild Steel | ||
Standards/Approvals No | ||
Width 36mm | ||
Series GH | ||
Length 92mm | ||
Height 42mm | ||
RS PRO Push Pull Toggle Clamp with Safety Latch
These Push Pull Toggle Clamps with safety latch from our own RS PRO brand offer the advantage of having a low profile, using side or end clamping and are most suitable for applications having a height restriction. They will hold the clamping arm of a manual clamp in both the closed and open positions so that it is protected against unintentional opening or closing through vibration or if the clamp is mounted overhead.
Features and Benefits
• Large and quick opening
• Rivets made of stainless steel
• Bearings are pre-lubricated
• Ergonomic, oil-resistant handle with large grip surface and soft components
• The design of the clamp enables speed of operation and release, combined with high holding force
Where can you use this toggle clamp?
These push pull toggle clamps can be used in a wide range of applications such as metalworking industry when drilling, welding, bending, grinding, testing and fitting. It is also suitable to use this in wood and plastic industry for glueing, cutting and milling jigs.
What is the clamping force?
Clamping force is the force which you apply when closing the clamp and it is measured between the arms and the component.
What is the handling force?
Handling force is the force the closed arms transfers to the workpiece, without risk of deformation under machine force.
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Liens connexes
- RS PRO 70 mm x 12 mm Hook Type Toggle Clamp Clamp
- RS PRO 90 ° x 12.7 mm Toggle Clamp Clamp
- RS PRO 90 ° x 50.9 mm Toggle Clamp Clamp
- RS PRO 90 ° x 67.2 mm Toggle Clamp Clamp
- RS PRO 90 ° x 34.9 mm Toggle Clamp Clamp
- RS PRO 16.9 mm x 17 mm Toggle Clamp Clamp
- RS PRO 38 mm x 38 mm Toggle Clamp Clamp
- RS PRO 19 mm x 20.3 mm Toggle Clamp Clamp