RS PRO 16.9 mm x 17 mm Toggle Clamp Clamp
- N° de stock RS:
- 254-670
- Numéro d'article Distrelec:
- 304-17-336
- Fabricant:
- RS PRO
Sous-total (1 unité)*
14,21 €
(TVA exclue)
17,19 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 135 unité(s) prête(s) à être expédiée(s)
- Plus 275 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 14,21 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 254-670
- Numéro d'article Distrelec:
- 304-17-336
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Sub Type | Toggle Clamp | |
| Product Type | Clamp | |
| Jaw Opening | 16.9mm | |
| Jaw Depth | 17mm | |
| Holding Force | 45kg | |
| Finish | Chrome | |
| Material | Stainless Steel | |
| Width | 27mm | |
| Series | GH | |
| Height | 43.5mm | |
| Length | 67.9mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Sub Type Toggle Clamp | ||
Product Type Clamp | ||
Jaw Opening 16.9mm | ||
Jaw Depth 17mm | ||
Holding Force 45kg | ||
Finish Chrome | ||
Material Stainless Steel | ||
Width 27mm | ||
Series GH | ||
Height 43.5mm | ||
Length 67.9mm | ||
Standards/Approvals No | ||
- Pays d'origine :
- TW
RS PRO Push Pull Toggle Clamp
This Push Pull Toggle Clamp from our own RS PRO brand offers the advantage of having a low profile, using side or end clamping and are most suitable for applications having a height restriction. With large power transmission and minimum operating effort, this toggle clamp gives you maximum clamping force to help you out in any job.
Features and Benefits
• Large and quick opening
• The ergonomic handle made from vinyl which is easy to use due to increased grip area
• Handle Locks in both forward and reverse position
• Stainless steel rivets
• Body and linkage components are zinc plated to resist corrosion
• The clamps are self-arresting, the remain locked, resisting the force produced when machining components
Where can you use this toggle clamp?
These push pull toggle clamps can be used in a wide range of applications such as metalworking industry when drilling, welding, bending, grinding, testing and fitting. It is also suitable to use this in wood and plastic industry for glueing, cutting and milling jigs.
What is the clamping force?
Clamping force is the force which you apply when closing the clamp and it is measured between the arms and the component.
What is the handling force?
Handling force is the force the closed arms transfers to the workpiece, without risk of deformation under machine force.
RS PRO
Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Liens connexes
- RS PRO 16.9 mm Push Pull Toggle Clamp Clamp
- RS PRO 90 ° x 12.7 mm Toggle Clamp Clamp
- RS PRO 90 ° x 50.9 mm Toggle Clamp Clamp
- RS PRO 90 ° x 67.2 mm Toggle Clamp Clamp
- RS PRO 90 ° x 34.9 mm Toggle Clamp Clamp
- RS PRO 70 mm x 12 mm Toggle Clamp Clamp
- RS PRO 38 mm x 38 mm Toggle Clamp Clamp
- RS PRO 19 mm x 20.3 mm Toggle Clamp Clamp