Sefram MW3950B Clamp Meter 60 A ac 600 V dc 600 V ac 600 V CAT III Non-Contact Voltage Detector

Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
217-5202
Référence fabricant:
MW3950B
Fabricant:
Sefram
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Sefram

Product Type

Clamp Meter

Resistance Resolution

0.1Ω

Maximum AC Voltage Measurement

600V ac

Maximum DC Voltage Measurement

600V dc

Model Number

MW3950B

DC Voltage Resolution

100 mV dc

Clamp Meter Type

Leakage Clamp Meter

DC Voltage Accuracy

±7 % rdg + 2 Digits

Maximum Jaw Opening

58mm

AC Voltage Resolution

100mV ac

AC Voltage Accuracy

±1 % rdg + 5 Digits

Minimum Operating Temperature

0°C

AC Current Resolution

100mA

AC Current Accuracy

±1.9 % rdg + 5 Digits

Resistance Measurement Accuracy

±1 % + 3 Digits

Maximum Operating Temperature

50°C

Height

50mm

Length

90mm

Width

250mm

Standards/Approvals

RoHS

Weight

500g

Functions Measured

AC Voltage, DC Voltage, AC Current

True RMS

Yes

Maximum AC Current Measurement

60A ac

Maximum Conductor Size

40mm

Battery Type

AAA

Power Source

Battery

Display Type

LCD

Battery Life

300h

Safety Category Level

600 V CAT III

Non-Contact Voltage Detector

Yes

Pays d'origine :
TW
The Sefram MW3950B is the ideal tool for measuring leakage currents. Measure the leakage currents present on the earth, determine the leakage in a cable by positioning the clamp directly around a cable (without the earth wire), also measure currents up to 60A AC with a resolution of 1μA.with its Bluetooth interface and its application

dedicated to tablets or smartphones (Android or IOS), you can monitor your measurements and record them in real time. Then export the data via

the tablet or the smartphone in .csv file in order to be able to process them in a spreadsheet software. By comparing one transmitting end and the corresponding receiving end, the SEFRAM 96 also can test installed cable far away by using the receiving unit.

The tester provides the variety for wiring check, such as cable continuity, open status, short status and miss-wired.

LCD 6000 counts with backlight

Current measurement up to 60A AC

Minimum resolution : 1μA

Low pass filter

Maximum Jaw Opening : 42mm

High Frequency Rejection (selectable : 50Hz, 60Hz & 1kHz)

True RMS reading

Manual and Automatic range

Max, Min and HOLD functions

Bluetooth interface to save reading values

Torch light

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.