Seeit SUPERPRO-610P Universal Programmer, Universal Programmer for EPROM, PLDs, ARM9 32 bit MCU, FLASH

Voir la catégorie

Sous-total (1 unité)*

1 188,36 €

(TVA exclue)

1 437,92 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • Expédition à partir du 16 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +1 188,36 €

*Prix donné à titre indicatif

N° de stock RS:
798-4393
Référence fabricant:
SUPERPRO-610P
Fabricant:
Seeit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Seeit

Product Type

Universal Programmer

Sub Type

Universal Programmer

For Use With

EPROM, PLDs, ARM9 32 bit MCU, FLASH

Kit Contents

In-Circuit Debugger/Programmer, Cable

Programmer Name

SUPERPRO-610P

Interface Type

USB 2.0

Standards/Approvals

No

Pays d'origine :
CN

SUPERPRO 610P, High-Speed Universal Programmer, USB 2.0


The SuperPro-610P is an universal production programmer equipped with ARM9 processor with a USB 2.0 interface. Based on the 48-pin ZIF socket it can program over 32000 differents components among EPROMs, EEPROMs, FLASHs memories, PLDs and microcontrollers. It can program low voltage components down to 1.2V. It doesn’t need any adapters for any SDIP packages. The programming is extremely fast based on the use of algorithm technology downloaded in the CPU of the programmer during the selection of a device. An optional ISP adapter permit to program components soldered on printed circuits or devices in special packages. The software runs under Windows 98/ME/NT/2000/XP/Windows7/Windows8 (32/64 bits). Updates can be download freely.

Supported devices: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller

Packages supported: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP, and more

Tests and Detects incorrect insertion of the device and defective pin

protected against short circuits and over-voltages

Computer interface with USB 2.0

AC Power Adapter: AC input 90V to 250V, 50/60Hz, DC output 12V/2A; power: 15W

Dimensions: 178 x 130 x 40 mm, Weight: 0.8kg

Kit Contents


Programmer with 48-pins ZIF socket

Power Adaptor 90-260Vac to 12Vdc

USB-B to USB-A cable

Software on CD-ROM

User manual in English and French

PC Based Programmers


Liens connexes