WJ Furse High Conductivity Copper with Electro-Tin Plated and Nylon Insulated Pillars Mounting Kit Mounting Kit for use
- N° de stock RS:
- 239-731
- Référence fabricant:
- 7TCA085400R0001 CME4
- Fabricant:
- WJ Furse
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
36,36 €
(TVA exclue)
44,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 18 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 36,36 € |
| 10 - 24 | 33,77 € |
| 25 - 49 | 30,43 € |
| 50 - 99 | 27,38 € |
| 100 + | 24,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 239-731
- Référence fabricant:
- 7TCA085400R0001 CME4
- Fabricant:
- WJ Furse
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | WJ Furse | |
| Product Type | Mounting Kit | |
| For Use With | modems and communications interfaces, Control equipment | |
| Material | High Conductivity Copper with Electro-Tin Plated and Nylon Insulated Pillars | |
| Depth | 12mm | |
| Height | 73mm | |
| Width | 25mm | |
| Heater Included | No | |
| Fan Included | No | |
| Standards/Approvals | No | |
| Accessory Type | Mounting Kit | |
| Sélectionner tout | ||
|---|---|---|
Marque WJ Furse | ||
Product Type Mounting Kit | ||
For Use With modems and communications interfaces, Control equipment | ||
Material High Conductivity Copper with Electro-Tin Plated and Nylon Insulated Pillars | ||
Depth 12mm | ||
Height 73mm | ||
Width 25mm | ||
Heater Included No | ||
Fan Included No | ||
Standards/Approvals No | ||
Accessory Type Mounting Kit | ||
- Pays d'origine :
- GB
WJ Furse twisted- pair lightning Surge Arrestors - ESP D & TN Series
From WJ Furse, these lightning surge arrestors are designed for use on twisted-pair lines found in process control equipment, modems and communications interfaces. These surge protectors offer full mode protection with very low let through voltage (to BS EN 62305) between all lines. The full mode design allows for the continued operation of protected equipment while also handling partial lightning currents. ESP series surge protectors offer repeated protection in lightning intense environments and are encased within a strong, flame retardant ABS housing.
Features and benefits:
300 mA current rating;Low inline resistance;Colour coded terminals;Effective earthing from substantial earth stud;Integral earthing plate for enhanced connection to earth with a CME kit;Supplied ready for flat mounting on the side or on the base;A built-in foot allows for clip-on mounting for top hat DIN Rails;Easy connection of cable screen to earth with screen terminal
Installation:
These surge protectors should be installed closely to the system's earth start point. They should be connected in series with the data communication or signal line close to the equipment that is being protected, such as the control panel. Alternatively, these surge protectors should be installed where the signal line enters or leaves the building. Surge protectors should be installed within a separate enclosure or in an existing enclosure.
Accessories
CME 4 (239-731)
Transient Voltage Suppressors (Data Lines)
Liens connexes
- WJ Furse Enclosure
- WJ Furse, WBX Surge Protection Device ESP Protector
- WJ Furse Earth Rod 1.2 m Copper
- WJ Furse Polypropylene Lightning Earth Clip 152.4mm
- WJ Furse Polypropylene Lightning Earth Clip 457.2mm
- WJ Furse Earth Stud 157.48 mm Steel
- WJ Furse ABS Video Lightning Protector Video Lightning Protector for use with Coaxial CCTV cables with BNC connectors
- WJ Furse Copper Earth Clamp Nominal Rod dia. 9.5 mm