Infineon, CAN Transceiver 5 Mbps, 14-Pin TSON
- N° de stock RS:
- 258-1711P
- Référence fabricant:
- TLT9255WLCXUMA1
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total 20 unités (conditionné en bande continue)*
31,40 €
(TVA exclue)
38,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 5 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 20 - 48 | 1,57 € |
| 50 - 98 | 1,48 € |
| 100 - 198 | 1,37 € |
| 200 + | 1,28 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 258-1711P
- Référence fabricant:
- TLT9255WLCXUMA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 5Mbps | |
| Sub Type | Interface IC | |
| Power Down Mode | High Speed | |
| Supply Current | 35mA | |
| Mount Type | Surface | |
| Package Type | TSON | |
| Interface Type | CAN | |
| Pin Count | 14 | |
| Minimum Supply Voltage | 4.75V | |
| Maximum Supply Voltage | 40V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Length | 4.5mm | |
| Width | 3 mm | |
| Standards/Approvals | ISO 11898-2, RoHS | |
| Height | 1mm | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 5Mbps | ||
Sub Type Interface IC | ||
Power Down Mode High Speed | ||
Supply Current 35mA | ||
Mount Type Surface | ||
Package Type TSON | ||
Interface Type CAN | ||
Pin Count 14 | ||
Minimum Supply Voltage 4.75V | ||
Maximum Supply Voltage 40V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Length 4.5mm | ||
Width 3 mm | ||
Standards/Approvals ISO 11898-2, RoHS | ||
Height 1mm | ||
Automotive Standard AEC-Q100 | ||
The Infineon HS CAN transceiver with partial networking is interface between the physical bus layer and the CAN protocol controller, the HS CAN transceiver with partial networking drives the signals to the bus and protects the microcontroller from interference generated within the network. Based on the high symmetry of the CANH and CANL signals, the HS CAN transceiver with partial networking provides a very low level of electromagnetic emission within a wide frequency range, allowing the operation of the HS CAN transceiver with partial networking without a common mode choke in automotive and industrial applications. The HS CAN transceiver with partial networking is enclosed in an RoHS compliant PG-TSON-14 package and fulfils the requirements of the ISO11898-2.
HS CAN standard data rates up to 1MBit/s
CAN FD data rates up to 5 MBit/s
Wide common mode range for electromagnetic immunity
Very low electromagnetic emission
Excellent ESD robustness, ±10 kV according to IEC 61000-4-2
Independent supply concept on VCC and VBAT pins
Liens connexes
- Infineon TLT9255WLCXUMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9350VSJXTMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9351VSJXTMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9350SJXTMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9250LEXUMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9252VSKXUMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9252VLCXUMA1, CAN Transceiver 5Mbps CAN
- Infineon TLE9255WLCXUMA1, CAN Transceiver 5Mbps CAN
