Microchip ATA6560-GBQW-N, CAN Transceiver 5 Mbps, 8-Pin
- N° de stock RS:
- 234-3716
- Référence fabricant:
- ATA6560-GBQW-N
- Fabricant:
- Microchip
Sous-total (1 bobine de 6000 unités)*
2 166,00 €
(TVA exclue)
2 622,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 16 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 6000 + | 0,361 € | 2 166,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 234-3716
- Référence fabricant:
- ATA6560-GBQW-N
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 5Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Standby | |
| Supply Current | 5mA | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Series | ATA6560 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 5Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Standby | ||
Supply Current 5mA | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Series ATA6560 | ||
Automotive Standard No | ||
The Microchip ATA6560-GBQW-N is a 8 pin high-speed CAN transceiver that provides an Interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed (up to 5 Mbps) CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller. It offers improved Electromagnetic Compatibility (EMC) and ESD performance.
Fully ISO 11898-2, ISO 11898-5, and SAE J2284 Compliant
CAN FD Ready
Communication Speed up to 5 Mbps
Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)
Differential receiver with wide common-mode range
ATA6560: Silent Mode (Receive Only)
Remote wake-up Capability via CAN Bus
Functional behaviour predictable under all supply conditions
Transceiver disengages from the Bus when not powered up
RXD recessive clamping detection
High Electrostatic Discharge (ESD) handling capability on the bus pins
Bus pins are protected against transients in automotive environments
Transmit Data (TXD) Dominant Time-Out Function
Under voltage detection on VCC and VIO pins
CANH/CANL short-circuit and over temperature protected