Microchip ATA663211-GAQW, CAN Caps 20 kbps, 8-Pin SOIC

Sous-total (1 bobine de 4000 unités)*

1 676,00 €

(TVA exclue)

2 028,00 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
Temporairement en rupture de stock
  • Expédition à partir du 26 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
la bobine*
4000 +0,419 €1 676,00 €

*Prix donné à titre indicatif

N° de stock RS:
631-342
Référence fabricant:
ATA663211-GAQW
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Maximum Data Rate

20kbps

Product Type

CAN Caps

Number of Transceivers

1

Sub Type

LIN Physical Layer Transceiver

Power Down Mode

Yes

Supply Current

250μA

Mount Type

Surface

Interface Type

LIN

Package Type

SOIC

Pin Count

8

Minimum Supply Voltage

5V

Maximum Supply Voltage

40V

ESD Protection

Yes

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

150°C

Length

3mm

Series

ATA663211

Standards/Approvals

AEC-Q006, ISO 7637, SAEJ2602-2, ISO 26262, IEC 61000-4-2, AEC-Q100

Width

3.9 mm

Automotive Standard

AEC-Q100, ISO 7637, AEC-Q006, IEC 61000-4-2, ISO 26262

Pays d'origine :
PH
The Microchip Fully integrated LIN transceiver designed in compliance with the LIN specification 2.0, 2.1, 2.2, 2.2A and SAEJ2602-2. It interfaces the LIN protocol handler and the physical layer. The device is designed to handle the low-speed data communication in vehicles, for example, in convenience electronics. Improved slope control at the LIN bus ensures data communication up to 20Kbaud. Sleep mode guarantees minimal current consumption even in the case of a floating bus line or a short circuit on the LIN bus to GND.

Wake up source recognition

TXD time out timer

Bus pin is over temperature and short circuit protected vs. GND and battery

Advanced EMC and ESD performance

Fulfils the OEM “Hardware Requirements for LIN in Automotive Applications Rev.1.3”

Interference and damage protection according to ISO7637

AEC Q006 and AEC Q100 qualified

Liens connexes

Recently viewed