Igus 07 Black, W27mm x D15 mm, L1000.00 mm, 18 mm Min. Bend Radius, Igumid GLW
- N° de stock RS:
- 756-9039
- Référence fabricant:
- 07.20.018.0
- Fabricant:
- Igus
Visuel non contractuel
Sous-total (1 unité)*
40,35 €
(TVA exclue)
48,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s)
- Plus 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 40,35 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 756-9039
- Référence fabricant:
- 07.20.018.0
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Cable Trunking | |
| Width | 27mm | |
| Depth | 15mm | |
| Colour | Black | |
| Material | Igumid GLW | |
| Length | 1m | |
| Minimum Bend Radius | 18mm | |
| Series | 07 | |
| Integrated Strain Relief | Yes | |
| Standards/Approvals | REACH, RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Cable Trunking | ||
Width 27mm | ||
Depth 15mm | ||
Colour Black | ||
Material Igumid GLW | ||
Length 1m | ||
Minimum Bend Radius 18mm | ||
Series 07 | ||
Integrated Strain Relief Yes | ||
Standards/Approvals REACH, RoHS | ||
- Pays d'origine :
- DE
Igus 200 Series Cable Trunking, 1m Length, 54mm Width - 200.03.075.0
This cable trunking provides organised routing and protection for electrical and control cabling in industrial environments. It is intended for installations where fire performance and mechanical routing constraints are important, offering a ducting solution that integrates strain relief and is suitable for use in automated and electrical assemblies.
Features and Benefits:
• Flame-retardant material reduces fire propagation risk while protecting cables
• Integrated strain relief secures cable entry and prevents movement
• 75mm minimum bend radius preserves conductor integrity on bends
• REACH and RoHS conformity supports hazardous-substance restrictions
• Integrated strain relief secures cable entry and prevents movement
• 75mm minimum bend radius preserves conductor integrity on bends
• REACH and RoHS conformity supports hazardous-substance restrictions
Applications
• Suitable for routing power and signal cables in automation cabinets
• Ideal for cable management on assembly-line equipment
• Used for protective ducting in electrical distribution enclosures
• Can be used for organising wiring in mechanical control panels
• Ideal for cable management on assembly-line equipment
• Used for protective ducting in electrical distribution enclosures
• Can be used for organising wiring in mechanical control panels
What material properties contribute to flame performance?
The trunking is made from a specialised polymer that exhibits flame-retardant behaviour to limit burning and slow fire spread.
How does the integrated strain relief affect installation?
The built-in strain relief secures cable entries without additional clamps, reducing installation steps and mechanical stress at termination points.
What physical sizes are relevant for planning installations?
The product has a 54mm width and a 35mm depth, supplied in 1m lengths for run planning and modular assembly.
Which approvals relate to substance restrictions?
The product meets REACH and RoHS requirements concerning restricted chemicals and hazardous substances.
Note
All chains supplied in 1m lengths.
The 15 and 17 Series brackets are supplied complete with cable tie fingers. This reduces the potential for creepage during operation. They may be removed if not needed. Dimension A & B are external dimensions, C & D are internal.
The 15 and 17 Series brackets are supplied complete with cable tie fingers. This reduces the potential for creepage during operation. They may be removed if not needed. Dimension A & B are external dimensions, C & D are internal.