Igus 07 Black, W16.5mm x D15 mm, L1 m, 38 mm Min. Bend Radius, Igumid GLW
- N° de stock RS:
- 215-0955
- Référence fabricant:
- 07.10.038.0
- Fabricant:
- Igus
Sous-total (1 unité)*
33,61 €
(TVA exclue)
40,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 16 unité(s) expédiée(s) à partir du 18 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 33,61 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 215-0955
- Référence fabricant:
- 07.10.038.0
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Cable Trunking | |
| Width | 16.5mm | |
| Depth | 15mm | |
| Colour | Black | |
| Material | Igumid GLW | |
| Length | 1m | |
| Minimum Bend Radius | 38mm | |
| Series | 07 | |
| Standards/Approvals | REACH, RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Cable Trunking | ||
Width 16.5mm | ||
Depth 15mm | ||
Colour Black | ||
Material Igumid GLW | ||
Length 1m | ||
Minimum Bend Radius 38mm | ||
Series 07 | ||
Standards/Approvals REACH, RoHS | ||
Statut RoHS : Exempté
- Pays d'origine :
- DE
Igus Series 07 Cable Trunking, 1m Length, 16.5mm Width - 07.10.038.0
This cable trunking provides a compact channel for routing and protecting cable runs in industrial settings. Designed for use where a slim profile and controlled bend are required, it offers a durable polymer construction and a 1m length suitable for modular installations.
Features and Benefits:
• Made from Igumid GLW material for robust plastic performance
• 38mm minimum bend radius to protect cable integrity
• 16.5mm width supports tight-space cable routing
• 15mm depth accommodates low-profile cable bundles
• Supplied in black to minimise visual impact in installations
• Conforms to REACH and RoHS for regulated material content
• 38mm minimum bend radius to protect cable integrity
• 16.5mm width supports tight-space cable routing
• 15mm depth accommodates low-profile cable bundles
• Supplied in black to minimise visual impact in installations
• Conforms to REACH and RoHS for regulated material content
Applications
• Suitable for control cabinet internal cable organisation
• Ideal for machine tool cable guidance in confined spaces
• Used with sensor and actuator wiring in automation racks
• Can be used for low-profile power and signal distribution runs
• Used for retrofit installations where narrow channels are required
• Ideal for machine tool cable guidance in confined spaces
• Used with sensor and actuator wiring in automation racks
• Can be used for low-profile power and signal distribution runs
• Used for retrofit installations where narrow channels are required
What material properties affect wear and longevity in use?
The polymer construction offers chemical resistance and dimensional stability under typical industrial temperatures, helping maintain channel shape during continuous operation.
How should installers manage tight-radius runs to avoid conductor stress?
Use the specified minimum bend radius as a guide and route cables with gradual curves, avoiding any sharp kinks that could compromise insulation.
How does the product handle regulatory material restrictions?
It is manufactured with substances compliant with REACH and RoHS requirements, limiting restricted chemicals in the composition.
What considerations apply when integrating into existing cableways?
Its 1m modular length and narrow profile allow straightforward alignment with other trunking sections and mounting systems, reducing the need for extensive layout changes.
Note
All chains supplied in 1m lengths.
The 15 and 17 Series brackets are supplied complete with cable tie fingers. This reduces the potential for creepage during operation. They may be removed if not needed. Dimension A & B are external dimensions, C & D are internal.
The 15 and 17 Series brackets are supplied complete with cable tie fingers. This reduces the potential for creepage during operation. They may be removed if not needed. Dimension A & B are external dimensions, C & D are internal.