SKF E2.629-2Z/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- N° de stock RS:
- 719-2011
- Référence fabricant:
- E2.629-2Z/C3
- Fabricant:
- SKF
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
5,39 €
(TVA exclue)
6,52 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 27 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 5,39 € |
| 5 - 9 | 5,17 € |
| 10 - 24 | 5,08 € |
| 25 + | 4,96 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 719-2011
- Référence fabricant:
- E2.629-2Z/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 9mm | |
| Outside Diameter | 26mm | |
| Race Width | 8mm | |
| Cage Material | Non-Metallic | |
| Race Material | Stainless Steel | |
| Ball Material | Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Static Load Rating | 1.93kN | |
| Internal Clearance | C3 | |
| Dynamic Load Rating | 4.62kN | |
| Bore Type | Parallel | |
| Series | 2 Light | |
| Standards/Approvals | No | |
| Limiting Speed | 36000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Flange Outside Diameter | 26mm | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 9mm | ||
Outside Diameter 26mm | ||
Race Width 8mm | ||
Cage Material Non-Metallic | ||
Race Material Stainless Steel | ||
Ball Material Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Static Load Rating 1.93kN | ||
Internal Clearance C3 | ||
Dynamic Load Rating 4.62kN | ||
Bore Type Parallel | ||
Series 2 Light | ||
Standards/Approvals No | ||
Limiting Speed 36000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Flange Outside Diameter 26mm | ||
Race Type Plain | ||
Statut RoHS : Exempté
- Pays d'origine :
- IT
SKF Ball Bearing, Plain Race, Deep Groove, 9mm ID, 26mm OD - E2.629-2Z/C3
Use this ball bearing from SKF to increase the efficiency of your motor. It has a cylindrical shape with a parallel bore to fit over the motor shaft and support axial and radial loads in both directions. The balls are set in a deep groove to deliver smooth movement with minimal friction. This means less heat is generated during use, helping to prolong your machine's lifespan. Thanks to this low-friction design, the ball bearing is suitable for use at higher speeds and works with electric motors up to 37kW.
• Pre-greased units for ease of use
• Shielded on both ends to keep the bearings lubricated and stop dirt getting inside
• Body made from steel for strength and corrosion resistance
• Composite polymer cage reinforced with fibreglass for strength and resistance to chemicals, moisture and wear
Applications
• Food and beverage industries
• HVAC systems
• Chemical and electro-plating processes
• Measurement and instrumentation devices
Why does this ball bearing have a polymer cage?
This bearing comes with a polymer cage to give it good damping and insulation properties. It also helps to keep noise to a minimum.
Liens connexes
- SKF 629-2Z/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF E2.6000-2Z/C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF 6000-2Z/C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- FAG 629-C-2Z-C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF E2.609-2Z/C3 1 Row Ball Bearing - 9 mm ID, 24 mm OD
- SKF 609-2Z/C3 1 Row Ball Bearing - 9 mm ID, 24 mm OD
- SKF 629/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD
- SKF 629-2RSH/C3 1 Row Ball Bearing - 9 mm ID, 26 mm OD