SKF 6000-2Z/C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- N° de stock RS:
- 667-0992
- Référence fabricant:
- 6000-2Z/C3
- Fabricant:
- SKF
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
5,62 €
(TVA exclue)
6,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 17 unité(s) prête(s) à être expédiée(s)
- Plus 477 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 5,62 € |
| 5 - 9 | 5,40 € |
| 10 - 24 | 5,29 € |
| 25 + | 5,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 667-0992
- Référence fabricant:
- 6000-2Z/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Ball Bearing | |
| Inside Diameter | 10mm | |
| Outside Diameter | 26mm | |
| Race Width | 8mm | |
| Cage Material | Sheet Metal | |
| Ball Material | Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 1.96kN | |
| Dynamic Load Rating | 4.75kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 6000 | |
| Limiting Speed | 34000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Ball Bearing | ||
Inside Diameter 10mm | ||
Outside Diameter 26mm | ||
Race Width 8mm | ||
Cage Material Sheet Metal | ||
Ball Material Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 1.96kN | ||
Dynamic Load Rating 4.75kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 6000 | ||
Limiting Speed 34000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Statut RoHS : Exempté
- Pays d'origine :
- IT
SKF Ball Bearing, Deep-Groove Bearing Type, Shielded, 10mm ID, 26mm OD - 6000-2Z/C3
This deep-groove ball bearing from SKF is a reliable choice for handling heavy loads. It's shielded on both sides for reliable performance in a contaminated environment without increasing torque. Your system is then protected against damage from ingress of dust or dirt, without compromising on energy efficiency. Stainless steel inner and outer rings offer good resistance to corrosion and chemicals, making this a suitable choice for demanding industrial applications. The deep grooves increase the stability of the balls to let this bearing handle loads in both axial and radial directions.
• Maximum speed of 34,000r/min for high-speed applications
• Bearings are secured in a cage for reduced noise and wear
• Explorer series uses a unique heat treatment during manufacturing to optimise performance
Applications
• Industrial transmissions
• Agricultural equipment
• Electric motors and generators
• Materials handling
What's the difference between shielded and sealed ball bearings?
In a sealed ball bearing, the sealant fully encloses the raceway to keep lubricants in and contaminants out. This is highly effective but can cause extra friction and heat, reducing the overall efficiency. On the other hand, shields are only attached to the outer ring. This eliminates the friction increase as the shield makes no contact with the inner ring.
Liens connexes
- FAG 6000-C-2Z-C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF 6000-2Z 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- RS PRO 6000-2Z/C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF W 6000-2Z 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF 6000-2Z/C2 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF 6000-2Z/C3GJN 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF 6000/C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD
- SKF E2.6000-2Z/C3 1 Row Ball Bearing - 10 mm ID, 26 mm OD