FAG 626-2RSR-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD

Sous-total (1 paquet de 10 unités)*

54,06 €

(TVA exclue)

65,41 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 30 unité(s) expédiée(s) à partir du 23 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le paquet*
10 +5,406 €54,06 €

*Prix donné à titre indicatif

N° de stock RS:
277-6632
Référence fabricant:
626-2RSR-HLN
Fabricant:
FAG
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

FAG

Product Type

Deep Groove Ball Bearing

Inside Diameter

6mm

Outside Diameter

19mm

Race Width

6mm

Cage Material

Steel Sheet Metal

Ball Material

Steel

End Type

Sealed

Number of Rows

1

Internal Clearance

CN

Static Load Rating

1.06kN

Dynamic Load Rating

2.8kN

Series

62-2RSR

Standards/Approvals

No

Bore Type

Cylindrical

Limiting Speed

25500rpm

Bearing Type

Single Row Deep Groove Ball

Flange Outside Diameter

19mm

Statut RoHS : Exempté

Pays d'origine :
CN

Schaeffler 62-2RSR Series Deep Groove Ball Bearing, 6mm Inside Diameter, 19mm Outside Diameter - 626-2RSR-HLN#N10


This deep groove ball bearing provides sealed, single-row rolling support for rotating shafts in industrial assemblies. It is designed for Compact assemblies requiring sealed protection and a steel sheet cage for sustained operation across a broad temperature range. The unit is intended for use where moderate radial loads and high rotational speeds are required in automation and electrical equipment.

Features & Benefits


• Limiting speed 25,500 r/min for high-speed applications
• Basic dynamic load rating 2,800 N to resist operational radial forces
• Basic static load rating 1,060 N for short-term static loads
• Sealed on both sides to prevent contamination ingress
• Steel sheet metal cage for dimensional stability under rotation
• CN internal clearance for controlled shaft fit and preload management

Applications


• Suitable for high-speed motors in automation systems
• Ideal for precision fans and cooling blowers in electronics
• used with small gearboxes in robotics and actuators
• Can be used for spindles in Compact electrical tools

What shaft diameter is compatible with this bearing?


The bore accepts a 6mm shaft for direct press-fit or light interference mounting.

What operating temperature range can be expected?


It functions between −30 °C and 100 °C, accommodating typical industrial environments.

How does the bearing cope with housing shoulder constraints?


The design permits a maximum housing shoulder diameter of 16.6mm and requires a minimum shaft shoulder diameter of 8.4mm for proper seating.

What are the minimum chamfer and fillet requirements for correct installation?


A minimum chamfer of 0.3mm is required and the fillet radius must not exceed 0.3mm to ensure correct ring contact.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.