FAG 626-2Z-HLN 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- N° de stock RS:
- 260-0566
- Référence fabricant:
- 626-2Z-HLN
- Fabricant:
- FAG
Sous-total (1 paquet de 10 unités)*
46,26 €
(TVA exclue)
55,97 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 180 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 4,626 € | 46,26 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-0566
- Référence fabricant:
- 626-2Z-HLN
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Inside Diameter | 6mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 19mm | |
| Race Width | 6mm | |
| Ball Material | Steel | |
| Cage Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 1.06kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 2.8kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Series | 62 | |
| Limiting Speed | 44500rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Plain | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Inside Diameter 6mm | ||
Product Type Ball Bearing | ||
Outside Diameter 19mm | ||
Race Width 6mm | ||
Ball Material Steel | ||
Cage Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 1.06kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 2.8kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Series 62 | ||
Limiting Speed 44500rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Plain | ||
Statut RoHS : Exempté
Schaeffler Series 62 Ball Bearing, 6mm Inside Diameter, 19mm Outside Diameter - 626-2Z-HLN
This ball bearing is a compact, single-row deep-groove unit designed for precision rotary support in miniature assemblies. It operates across a wide temperature span and is configured with shields and a steel cage to suit demanding rotational applications within automation, electronics and mechanical systems.
Features & Benefits
• Dynamic load capacity of 2.8 kN supports sustained radial loads
• Static rating of 1.06 kN resists Peak or shock loads
• Steel shields and closed ends reduce contamination ingress
• Steel cage construction maintains efficient rolling-element spacing
• Static rating of 1.06 kN resists Peak or shock loads
• Steel shields and closed ends reduce contamination ingress
• Steel cage construction maintains efficient rolling-element spacing
**Applications**
• Suitable for high-speed spindle modules in automation equipment
• Ideal for miniature motors in specialist electronics devices
• Used with Compact gear assemblies in precision robotics
• Can be used for rotary encoders and small electrical drives
• Ideal for miniature motors in specialist electronics devices
• Used with Compact gear assemblies in precision robotics
• Can be used for rotary encoders and small electrical drives
What shaft and housing shoulder limits are relevant for mounting?
The minimum shaft-shoulder diameter to accommodate the bearing is 8.4mm and the maximum housing-shoulder diameter is 16.6mm to ensure correct axial seating.
What operating temperatures can I expect before material limits apply?
The bearing functions across a temperature range from −30°C up to 120°C, covering most industrial thermal conditions for small rotating components.
How should speed ratings be interpreted for continuous operation?
Use the limiting speed of 44,500 r/min as the absolute maximum
the reference speed of 30,500 r/min is more appropriate for prolonged service to balance life and heat generation.
Which clearance class affects axial tolerance during assembly?
The CN internal clearance designation indicates a normal clearance level that influences both preload choices and axial displacement under load.
What manufacturing materials form the rolling elements and rings?
The bearing’s balls and rings are manufactured from steel, giving standard hardness and fatigue characteristics for small-size deep-groove bearings.
Liens connexes
- FAG 626-2Z-C3-HLN 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-2RSR-HLN-C3 1 Row Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-Z-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 607-2Z-HLN 1 Row Ball Bearing - 7 mm ID, 19 mm OD
- FAG 626-2RSR-HLN#N10 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 626-2RSR-C3-HLN 1 Row Deep Groove Ball Bearing - 6 mm ID, 19 mm OD
- FAG 607-2Z-HLN-C3 1 Row Ball Bearing - 7 mm ID, 19 mm OD
- FAG 625-2Z-HLN 1 Row Ball Bearing - 5 mm ID, 16 mm OD