FAG 6203-C-2HRS V 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- N° de stock RS:
- 260-0875
- Référence fabricant:
- 6203-C-2HRS V
- Fabricant:
- FAG
Sous-total (1 unité)*
6,78 €
(TVA exclue)
8,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 139 unité(s) expédiée(s) à partir du 23 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 6,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-0875
- Référence fabricant:
- 6203-C-2HRS V
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 17mm | |
| Outside Diameter | 40mm | |
| Race Width | 12mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 4.75kN | |
| Dynamic Load Rating | 11kN | |
| Series | Generation C | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 16900rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 17mm | ||
Outside Diameter 40mm | ||
Race Width 12mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 4.75kN | ||
Dynamic Load Rating 11kN | ||
Series Generation C | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 16900rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Statut RoHS : Exempté
- Pays d'origine :
- PT
Schaeffler Generation C Series Ball Bearing, 17mm Inside Diameter, 40mm Outside Diameter - 6203-C-2HRS >V
This ball bearing is a sealed, single‑row deep‑groove component designed to support radial loads in rotating assemblies within automation, electronics and mechanical systems. It is built for Compact installations where a closed‑end bearing with steel cage is required and operates across a moderate temperature range for general industrial environments.
Features & Benefits
• 11 kN dynamic load capacity for sustained radial loads
• 4.75 kN static load capacity for standing or shock loads
• Limiting speed 16,900 r/min for high‑speed rotating equipment
• Steel cage construction for dimensional stability under load
• 4.75 kN static load capacity for standing or shock loads
• Limiting speed 16,900 r/min for high‑speed rotating equipment
• Steel cage construction for dimensional stability under load
**Applications**
• Suitable for spindle use in Compact motor assemblies
• Ideal for conveyors and rotary indexing devices
• Used for small electric motors in automation systems
• Can be used in gearboxes requiring sealed radial bearings
• Ideal for conveyors and rotary indexing devices
• Used for small electric motors in automation systems
• Can be used in gearboxes requiring sealed radial bearings
What shaft and housing shoulder constraints should I allow for?
Minimum shaft shoulder diameter for full seating is 21.2mm and the maximum housing shoulder diameter is 35.8mm to ensure correct axial location.
What operating temperatures can be expected during use?
The bearing functions between −20°C to 100°C, accommodating typical workshop to light industrial ambient conditions.
How does the bearing handle surface fillets during installation?
Maximum permissible fillet radius at mating shoulders is 0.6mm while the minimum chamfer on mating faces should be 0.6mm to prevent contact with ring edges.
What mass should I account for when calculating rotating inertia?
Individual unit mass is 0.065kg for dynamic balancing and inertia considerations.
Are there recommended ring calibres to check for proper fit?
Outer ring calibre is 34.8mm and inner ring calibre is 22.8mm to verify seating dimensions during assembly.
Liens connexes
- FAG 6203-C-2HRS 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2HRS-C3 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2Z 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2Z>V 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6203-C-2Z-C3 1 Row Ball Bearing - 17 mm ID, 40 mm OD
- SNR 6203EE Ball Bearing - 17 mm ID, 40 mm OD
- FAG 6303-C-2HRS 1 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG 6303-C-2HRS-C3 1 Row Ball Bearing - 17 mm ID, 47 mm OD
