FAG 6204-C-2HRS V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- N° de stock RS:
- 260-0869
- Référence fabricant:
- 6204-C-2HRS V
- Fabricant:
- FAG
Sous-total (1 unité)*
7,99 €
(TVA exclue)
9,67 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 72 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 7,99 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-0869
- Référence fabricant:
- 6204-C-2HRS V
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 20mm | |
| Outside Diameter | 47mm | |
| Race Width | 14mm | |
| Ball Material | Steel | |
| Cage Material | Steel Sheet Metal | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 6.6kN | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 14.7kN | |
| Series | Generation C | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Limiting Speed | 14500rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 20mm | ||
Outside Diameter 47mm | ||
Race Width 14mm | ||
Ball Material Steel | ||
Cage Material Steel Sheet Metal | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 6.6kN | ||
Internal Clearance CN | ||
Dynamic Load Rating 14.7kN | ||
Series Generation C | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Limiting Speed 14500rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
Statut RoHS : Exempté
Schaeffler Generation C Series Ball Bearing, 20mm Inside Diameter, 47mm Outside Diameter - 6204-C-2HRS >V
This ball bearing is a single-row deep-groove bearing designed for rotational support in mechanical and electromechanical assemblies. It is intended for applications requiring sealed protection, a cylindrical bore, and Compact form to accommodate shafts where radial load capacity and smooth high-speed operation are priorities.
Features & Benefits
• 14.7kN dynamic load rating delivers sustained radial load handling
• 6.6kN static load rating resists permanent deformation under Peak loads
• 14,500r/min limiting speed supports high-speed rotating equipment
• Steel sheet-metal cage reduces centrifugal distortion at speed
• 6.6kN static load rating resists permanent deformation under Peak loads
• 14,500r/min limiting speed supports high-speed rotating equipment
• Steel sheet-metal cage reduces centrifugal distortion at speed
**Applications**
• Suitable for precision motor shafts in automation equipment
• Ideal for small gearboxes in industrial drives
• Used for spindle support in Compact electrical actuators
• Can be used for bearing seats in control systems and robotics
• Ideal for small gearboxes in industrial drives
• Used for spindle support in Compact electrical actuators
• Can be used for bearing seats in control systems and robotics
What temperature range can it operate within?
The bearing functions between -20°C to 100°C, permitting use across typical industrial thermal environments.
What mounting shoulder and fillet considerations apply?
The minimum shaft-shoulder diameter required is 25.6mm, housing-shoulder maximum is 41.4mm, and maximum fillet radius on mating components is 1mm.
How Compact is the outer ring running diameter for housing fitment?
The outer ring calibre diameter for locating in the housing is 41.4mm, enabling precise seating in standard housings.
What are the mass and fatigue limit relevant to dynamic calculations?
The component mass is 0.102kg and the radial fatigue limit is 455N for life-estimation and durability assessments.
Liens connexes
- FAG 6204-C-2HRS 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2HRS-C3>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2Z 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6303-C-2HRS 1 Row Ball Bearing - 17 mm ID, 47 mm OD
- FAG 6005-C-2HRS 1 Row Ball Bearing - 25 mm ID, 47 mm OD
- FAG 6204-C-2Z>V 1 Row Ball Bearing - 20 mm ID, 47 mm OD
- FAG 6204-C-2Z-C3 1 Row Ball Bearing - 20 mm ID, 47 mm OD
