FAG 634-2Z-HLC 1 Row Ball Bearing - 4 mm ID, 16 mm OD
- N° de stock RS:
- 260-0569
- Référence fabricant:
- 634-2Z-HLC
- Fabricant:
- FAG
Sous-total (1 paquet de 10 unités)*
53,50 €
(TVA exclue)
64,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 30 unité(s) expédiée(s) à partir du 19 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 5,35 € | 53,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 260-0569
- Référence fabricant:
- 634-2Z-HLC
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 4mm | |
| Outside Diameter | 16mm | |
| Race Width | 5mm | |
| Race Material | Steel | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Closed | |
| Number of Rows | 1 | |
| Static Load Rating | 671N | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 1.84kN | |
| Series | 63-2Z | |
| Standards/Approvals | No | |
| Bore Type | Parallel | |
| Limiting Speed | 53000rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Deep Grooved | |
| Flange Outside Diameter | 16mm | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 4mm | ||
Outside Diameter 16mm | ||
Race Width 5mm | ||
Race Material Steel | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Closed | ||
Number of Rows 1 | ||
Static Load Rating 671N | ||
Internal Clearance CN | ||
Dynamic Load Rating 1.84kN | ||
Series 63-2Z | ||
Standards/Approvals No | ||
Bore Type Parallel | ||
Limiting Speed 53000rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Deep Grooved | ||
Flange Outside Diameter 16mm | ||
- Pays d'origine :
- TH
Schaeffler 63-2Z Series Ball Bearing, 4mm Bore Size, 16mm Outside Diameter - 634-2Z-HLC
This ball bearing is a single-row deep-groove unit designed for miniature rotary applications requiring sealed protection and a Compact form. It operates across a wide temperature span and supports high-speed rotation with a steel construction for rings, balls and cage. The bearing is intended for installations where a parallel bore and a flange outside diameter match specific shaft and housing requirements.
Features and Benefits:
• 53,000r/min limiting speed increases rotational capability
• 1.84kN dynamic load capacity handles varying radial forces
• 671N static rating resists brinelling under static loads
• CN internal clearance reduces axial play for precision operation
• Steel sheet cage ensures dimensional stability at temperature
• 1.84kN dynamic load capacity handles varying radial forces
• 671N static rating resists brinelling under static loads
• CN internal clearance reduces axial play for precision operation
• Steel sheet cage ensures dimensional stability at temperature
Applications
• Suitable for high-speed miniature motors in instrumentation
• Used with precision spindles in small-scale machining
• Ideal for Compact office equipment requiring sealed bearings
• Can be used for micro-gearboxes where space is limited
• Used for handheld devices needing low-maintenance rotation
• Used with precision spindles in small-scale machining
• Ideal for Compact office equipment requiring sealed bearings
• Can be used for micro-gearboxes where space is limited
• Used for handheld devices needing low-maintenance rotation
What is the permitted operating temperature range?
The bearing functions between -30°C and 120°C.
What cage material is employed and why does it matter?
A steel sheet cage is used to provide strength and dimensional consistency at elevated temperatures.
What are the mounting shoulder constraints for installation?
Minimum shaft shoulder diameter is 6.4mm and maximum housing shoulder diameter is 13.6mm.
What fillet and chamfer limits must be observed?
Maximum fillet radius is 0.3mm and minimum chamfer dimension is 0.3mm.
How does the closed end design affect contamination protection?
The closed ends with shields reduce ingress, aiding operation in environments with light particulate presence.
Liens connexes
- FAG 688-2Z-HLC 1 Row Ball Bearing - 8 mm ID, 16 mm OD
- FAG 697-2Z-HLC 1 Row Ball Bearing - 7 mm ID, 17 mm OD
- FAG 61800-2Z-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- FAG 61803-2Z-HLC 1 Row Ball Bearing - 17 mm ID, 26 mm OD
- FAG 686-2Z-HLC 1 Row Ball Bearing - 6 mm ID, 13 mm OD
- FAG 61802-2Z-HLC 1 Row Ball Bearing - 15 mm ID, 24 mm OD
- FAG 61906-2Z-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- FAG 61804-2Z-HLC 1 Row Ball Bearing - 20 mm ID, 32 mm OD
