FAG 686-2Z-HLC 1 Row Ball Bearing - 6 mm ID, 13 mm OD
- N° de stock RS:
- 313-138
- Référence fabricant:
- 686-2Z-HLC
- Fabricant:
- FAG
Sous-total (1 paquet de 10 unités)*
107,42 €
(TVA exclue)
129,98 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 107,42 € | 10,742 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 313-138
- Référence fabricant:
- 686-2Z-HLC
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Ball Bearing | |
| Inside Diameter | 6mm | |
| Outside Diameter | 13mm | |
| Race Width | 5mm | |
| Cage Material | Steel Sheet Metal | |
| Ball Material | Steel | |
| Number of Rows | 1 | |
| Static Load Rating | 440N | |
| Internal Clearance | CN | |
| Dynamic Load Rating | 1.15N | |
| Bore Type | Cylindrical | |
| Series | 686 | |
| Standards/Approvals | RoHS | |
| Limiting Speed | 61rpm | |
| Bearing Type | Deep Groove | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Ball Bearing | ||
Inside Diameter 6mm | ||
Outside Diameter 13mm | ||
Race Width 5mm | ||
Cage Material Steel Sheet Metal | ||
Ball Material Steel | ||
Number of Rows 1 | ||
Static Load Rating 440N | ||
Internal Clearance CN | ||
Dynamic Load Rating 1.15N | ||
Bore Type Cylindrical | ||
Series 686 | ||
Standards/Approvals RoHS | ||
Limiting Speed 61rpm | ||
Bearing Type Deep Groove | ||
- Pays d'origine :
- JP
FAG 686 Series Ball Bearing, 6mm Inside Diameter, 13mm Outside Diameter - 686-2Z-HLC
This ball bearing provides precision radial support for Compact rotating assemblies within automation, electronics and mechanical equipment. It is a single-row deep-groove design intended to handle continuous rotation while minimising friction and maintaining internal clearance suitable for controlled axial play in small-scale mechanisms.
Features and Benefits:
• Sealed on both sides for contamination protection and reduced maintenance • Steel rolling elements deliver consistent rotational performance • Steel sheet-metal cage ensures stable ball guidance at elevated rpm • CN internal clearance permits controlled axial displacement under load • Conforms to RoHS for material restriction compliance in assemblies • Cylindrical bore offers straightforward press-fit installation
Applications
• Suitable for miniature motors in robotic actuators • Ideal for precision fans and cooling systems in electronics • Used with gearbox input shafts in automation modules • Can be used for small electromechanical actuators and servos • Used for shaft support in handheld electrical tools
What mounting method is recommended for secure shaft fit?
Use a light press fit into a cylindrical bore with correct alignment tools to avoid brinelling
ensure shaft and housing tolerances match recommended interference limits for miniature bearings.
How does the cage material affect thermal behaviour?
The steel sheet-metal cage provides low thermal expansion and high dimensional stability, helping maintain ball spacing and limiting deformation at elevated operating temperatures.
What load types can it withstand without permanent set?
It is rated for modest static radial loads up to its static capacity and is designed primarily for radial load transmission with defined static load capability under stationary or slow-speed conditions.
How should one consider rotational speed in system design?
Account for the bearings limiting speed relative to system rpm and thermal dissipation
apply suitable lubrication and avoid sustained operation above the specified limit to prevent premature wear.
Liens connexes
- FAG 695-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 13 mm OD
- FAG 697-2Z-HLC 1 Row Ball Bearing - 7 mm ID, 17 mm OD
- FAG 61800-2Z-HLC 1 Row Ball Bearing - 10 mm ID, 19 mm OD
- FAG 61803-2Z-HLC 1 Row Ball Bearing - 17 mm ID, 26 mm OD
- FAG 688-2Z-HLC 1 Row Ball Bearing - 8 mm ID, 16 mm OD
- FAG 61802-2Z-HLC 1 Row Ball Bearing - 15 mm ID, 24 mm OD
- FAG 61906-2Z-HLC 1 Row Ball Bearing - 30 mm ID, 47 mm OD
- FAG 61804-2Z-HLC 1 Row Ball Bearing - 20 mm ID, 32 mm OD
