SKF 2212 ETN9/C3 60 mm ID 2 Row Ball Bearing -, 110 mm OD
- N° de stock RS:
- 233-7090
- Référence fabricant:
- 2212 ETN9/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
134,13 €
(TVA exclue)
162,30 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 134,13 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-7090
- Référence fabricant:
- 2212 ETN9/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 60mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 110mm | |
| Race Width | 28mm | |
| Cage Material | Non-Metallic | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 2 | |
| Internal Clearance | C3 | |
| Static Load Rating | 17kN | |
| Dynamic Load Rating | 48.8kN | |
| Standards/Approvals | No | |
| Series | Self-aligning ball bearings | |
| Bore Type | Cylindrical | |
| Limiting Speed | 8000rpm | |
| Bearing Type | Self-Aligning | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 60mm | ||
Product Type Ball Bearing | ||
Outside Diameter 110mm | ||
Race Width 28mm | ||
Cage Material Non-Metallic | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 2 | ||
Internal Clearance C3 | ||
Static Load Rating 17kN | ||
Dynamic Load Rating 48.8kN | ||
Standards/Approvals No | ||
Series Self-aligning ball bearings | ||
Bore Type Cylindrical | ||
Limiting Speed 8000rpm | ||
Bearing Type Self-Aligning | ||
- Pays d'origine :
- MY
SKF Self-aligning ball bearings Series Ball Bearing, 60mm Inside Diameter, 110mm Outside Diameter - 2212 ETN9/C3
This ball bearing is a self-aligning bearing designed to accommodate shaft misalignment and support rotating assemblies in industrial machinery. It features an open-end configuration and a cylindrical bore, allowing straightforward mounting on shafts where alignment correction and radial load distribution are required. The construction uses steel balls and a non-metallic cage to maintain rolling element spacing under operational conditions.
Features and Benefits:
• Double-row layout provides enhanced load distribution and higher capacity
• Dynamic capacity of 48.8 kN supports sustained radial loads
• Static capacity of 17 kN resists heavy stationary loads during downtime
• Limiting speed rated at 8,000 r/min enables moderately high-speed operation
• Internal clearance class C3 allows for thermal expansion without seizure
• Non-metallic cage reduces friction and limits electrical conductivity
• Dynamic capacity of 48.8 kN supports sustained radial loads
• Static capacity of 17 kN resists heavy stationary loads during downtime
• Limiting speed rated at 8,000 r/min enables moderately high-speed operation
• Internal clearance class C3 allows for thermal expansion without seizure
• Non-metallic cage reduces friction and limits electrical conductivity
Applications
• Suitable for conveyor drive shafts requiring misalignment tolerance
• Ideal for gearboxes with moderate rotational speeds
• Used with electric motor end supports needing radial load capacity
• Can be used for agricultural equipment facing shaft deflection
• Appropriate for pump shafts operating at intermittent high loads
• Ideal for gearboxes with moderate rotational speeds
• Used with electric motor end supports needing radial load capacity
• Can be used for agricultural equipment facing shaft deflection
• Appropriate for pump shafts operating at intermittent high loads
What bore type is used for shaft mounting?
It has a cylindrical bore to fit standard cylindrical shafts.
How is axial misalignment handled in operation?
The bearings self-aligning geometry compensates shaft deflections without additional adjustments.
What rolling elements does it use and why does that matter?
Steel balls are employed to deliver predictable contact behaviour and fatigue life under radial loading.
What end condition affects maintenance access?
The open-end design permits Visual inspection and re-lubrication access where applicable.
What cage material influences electrical and wear characteristics?
The non-metallic cage lowers electrical continuity and can reduce wear at contact points.
Liens connexes
- SKF 2212 ETN9 60 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 2212 EKTN9/C3 60 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF 1212 ETN9/C3 60 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF C 2212 TN9/C3 Taper 60 mm ID Roller Bearing, 110 mm OD
- SKF NJ 2212 ECP/C3 60 mm ID Roller Bearing, 110 mm OD
- SKF 1310 ETN9/C3 50 mm ID 2 Row Ball Bearing -, 110 mm OD
- SKF NU 2212 ECML/C3 60 mm ID Cylindrical Roller Bearing, 110 mm OD
- SKF NU 2212 ECJ/C3 60 mm ID Cylindrical Roller Bearing, 110 mm OD
