SKF NJ 2212 ECP/C3 60 mm ID Roller Bearing, 110 mm OD
- N° de stock RS:
- 207-8610
- Référence fabricant:
- NJ 2212 ECP/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
172,68 €
(TVA exclue)
208,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 172,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-8610
- Référence fabricant:
- NJ 2212 ECP/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Race Width | 28mm | |
| Bore Type | Cylindrical | |
| Cage Material | Non-Metallic | |
| Roller Material | Steel | |
| Internal Clearance | C3 | |
| Number of Rows | 1 | |
| Standards/Approvals | No | |
| Series | NJ | |
| Limiting Speed | 7500rpm | |
| Bearing Material | Steel | |
| Dynamic Load Rating | 146kN | |
| Static Load Rating | 153kN | |
| Outside Diameter | 110mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Race Width 28mm | ||
Bore Type Cylindrical | ||
Cage Material Non-Metallic | ||
Roller Material Steel | ||
Internal Clearance C3 | ||
Number of Rows 1 | ||
Standards/Approvals No | ||
Series NJ | ||
Limiting Speed 7500rpm | ||
Bearing Material Steel | ||
Dynamic Load Rating 146kN | ||
Static Load Rating 153kN | ||
Outside Diameter 110mm | ||
- Pays d'origine :
- DE
SKF Series NJ Roller Bearing, 60mm Inside Diameter, 110mm Outside Diameter - NJ 2212 ECP/C3
This roller bearing is a cylindrical-bore single-row element designed to support radial loads in rotating assemblies where controlled internal play and robust load capacity are required. It combines steel rolling elements with a non‑metallic cage to maintain roller separation while operating at moderate rotational speeds, making it suitable for industrial shaft and housing arrangements.
Features and Benefits:
• 153 kN static capacity for high resistance to stationary loads
• 146 kN dynamic rating for sustained operational loading
• C3 internal clearance to accommodate thermal expansion
• Non‑metallic cage reduces noise and frictional heating
• Steel rollers and rings for consistent contact fatigue performance
• Limiting speed 7,500 rev/min for reliable rotational operation
• 146 kN dynamic rating for sustained operational loading
• C3 internal clearance to accommodate thermal expansion
• Non‑metallic cage reduces noise and frictional heating
• Steel rollers and rings for consistent contact fatigue performance
• Limiting speed 7,500 rev/min for reliable rotational operation
Applications
• Suitable for heavy‑duty radial shaft supports in industrial drives
• Used for gearbox intermediate shaft load‑bearing duties
• Ideal for mill and conveyor roll support assemblies
• Can be used for motor spindle radial support where clearance is needed
• Used with reduction units requiring controlled internal clearance
• Used for gearbox intermediate shaft load‑bearing duties
• Ideal for mill and conveyor roll support assemblies
• Can be used for motor spindle radial support where clearance is needed
• Used with reduction units requiring controlled internal clearance
What bore configuration does this unit use?
It uses a cylindrical bore suited to straight‑shank shaft fittings.
How many rows of rolling elements are included?
It contains a single row of rollers for radial load transmission.
Which component limits the assembly's maximum rotational speed?
The bearing's construction specifies a limiting speed of 7,500 rev/min based on material interactions.
What internal clearance grade is provided and why is it important?
The clearance is C3, which allows additional radial play to compensate for thermal growth during operation.
What materials are used for the rollers and cage?
Rollers and rings are steel, while the cage is manufactured from a non‑metallic material.
Liens connexes
- SKF NJ 2212 ECP 60 mm ID Roller Bearing, 110 mm OD
- SKF NJ 2212 ECML/C3 60 mm ID Cylindrical Roller Bearing, 110 mm OD
- SKF NU 2212 ECP/C3 60 mm ID Cylindrical Roller Bearing, 110 mm OD
- SKF NJ 212 ECP/C3 60 mm ID Cylindrical Roller Bearing, 110 mm OD
- SKF NJ 2310 ECP/C3 50 mm ID Cylindrical Roller Bearing, 110 mm OD
- SKF NJ 310 ECP/C3 50 mm ID Cylindrical Roller Bearing, 110 mm OD
- SKF NJ 2212 ECJ 60 mm ID Roller Bearing, 110 mm OD
- SKF NU 2212 ECP 60 mm ID Roller Bearing, 110 mm OD