SKF QJ 311 MA 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- N° de stock RS:
- 208-0412
- Référence fabricant:
- QJ 311 MA
- Fabricant:
- SKF
Sous-total (1 unité)*
353,21 €
(TVA exclue)
427,38 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 353,21 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 208-0412
- Référence fabricant:
- QJ 311 MA
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 55mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 120mm | |
| Race Width | 29mm | |
| Cage Material | Machined Metal | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Contact Angle | 35° | |
| Internal Clearance | CN | |
| Static Load Rating | 118kN | |
| Dynamic Load Rating | 137kN | |
| Bore Type | Parallel | |
| Series | SKF Explorer | |
| Standards/Approvals | No | |
| Limiting Speed | 10000rpm | |
| Bearing Type | Single Row Angular Contact Ball | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 55mm | ||
Product Type Ball Bearing | ||
Outside Diameter 120mm | ||
Race Width 29mm | ||
Cage Material Machined Metal | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Contact Angle 35° | ||
Internal Clearance CN | ||
Static Load Rating 118kN | ||
Dynamic Load Rating 137kN | ||
Bore Type Parallel | ||
Series SKF Explorer | ||
Standards/Approvals No | ||
Limiting Speed 10000rpm | ||
Bearing Type Single Row Angular Contact Ball | ||
- Pays d'origine :
- DE
The SKF Angular contact ball bearing has 55mm inner and 120mm outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.
The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.
Single row design
Cylindrical bore type
Steel bearing
Liens connexes
- SKF QJ 311 N2MA/C2L 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF QJ 311 N2MA/C3 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF 7311 BEP 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF 7311 BECBP 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF 7311 BECCM 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF 7311 BECBY 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF 7311 BEGAP 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF 7311 BEGAM 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width