SKF QJ 311 N2MA/C3 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- N° de stock RS:
- 464-128
- Référence fabricant:
- QJ 311 N2MA/C3
- Fabricant:
- SKF
Sous-total (1 unité)*
406,27 €
(TVA exclue)
491,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 14 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 406,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 464-128
- Référence fabricant:
- QJ 311 N2MA/C3
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 55mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 120mm | |
| Race Width | 29mm | |
| Cage Material | Machined Metal | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 118kN | |
| Contact Angle | 35° | |
| Dynamic Load Rating | 137kN | |
| Standards/Approvals | RoHS | |
| Series | QJ 311 | |
| Limiting Speed | 10000rpm | |
| Bearing Type | Four Point Contact | |
| Flange Outside Diameter | 120mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 55mm | ||
Product Type Ball Bearing | ||
Outside Diameter 120mm | ||
Race Width 29mm | ||
Cage Material Machined Metal | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 118kN | ||
Contact Angle 35° | ||
Dynamic Load Rating 137kN | ||
Standards/Approvals RoHS | ||
Series QJ 311 | ||
Limiting Speed 10000rpm | ||
Bearing Type Four Point Contact | ||
Flange Outside Diameter 120mm | ||
- Pays d'origine :
- AT
The SKF Four-point contact ball bearings with locating slots can accommodate high axial loads in both directions and small radial loads. They can operate at very high speeds and are more suitable than deep groove ball bearings for supporting large axial forces. The outer ring, with ball and cage assembly, can be mounted separately from the two inner ring halves. The locating slots can be used to prevent the outer ring from rotating.
High-speed capability
Accommodate high axial loads in both directions and small radial loads
Require considerably less axial space than double row angular contact ball bearings
Locating slots can be used to prevent the outer ring from rotating
Liens connexes
- SKF QJ 311 N2MA/C2L 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF QJ 311 MA 1 Row Ball Bearing - 55 mm ID, 120 mm OD 29 mm Race Width
- SKF QJ 226 N2MA/C3 1 Row Ball Bearing - 130 mm ID, 230 mm OD 40 mm Race Width
- SKF QJ 222 N2MA/C3 1 Row Ball Bearing - 110 mm ID, 200 mm OD 38 mm Race Width
- SKF QJ 328 N2MA/C3 1 Row Ball Bearing - 140 mm ID, 300 mm OD 62 mm Race Width
- SKF QJ 218 N2MA/C3 1 Row Ball Bearing - 90 mm ID, 160 mm OD 30 mm Race Width
- SKF QJ 314 N2MA/C3 1 Row Ball Bearing - 70 mm ID, 150 mm OD 35 mm Race Width
- SKF QJ 226 N2MA 1 Row Ball Bearing - 130 mm ID, 230 mm OD 40 mm Race Width