SKF 1726309-2RS1 1 Row Insert Ball Bearing - 45 mm ID, 100 mm OD
- N° de stock RS:
- 585-822
- Référence fabricant:
- 1726309-2RS1
- Fabricant:
- SKF
Sous-total (1 paquet de 20 unités)*
961,20 €
(TVA exclue)
1 163,05 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 961,20 € | 48,06 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 585-822
- Référence fabricant:
- 1726309-2RS1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 45mm | |
| Product Type | Insert Ball Bearing | |
| Outside Diameter | 100mm | |
| Race Width | 25mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 31.5kN | |
| Dynamic Load Rating | 52.7kN | |
| Standards/Approvals | RoHS Compliance | |
| Bore Type | Cylindrical | |
| Limiting Speed | 4500rpm | |
| Bearing Type | Insert Ball Bearing | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 45mm | ||
Product Type Insert Ball Bearing | ||
Outside Diameter 100mm | ||
Race Width 25mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 31.5kN | ||
Dynamic Load Rating 52.7kN | ||
Standards/Approvals RoHS Compliance | ||
Bore Type Cylindrical | ||
Limiting Speed 4500rpm | ||
Bearing Type Insert Ball Bearing | ||
- Pays d'origine :
- IT
The SKF Insert bearings are based on sealed deep groove ball bearings. These insert bearings are suitable for applications where smooth running is a key operational parameter. It can accommodate heavier axial loads than any other insert bearing. The bearings are sealed on both sides, made of sheet steel reinforced NBR, and are fitted in a recess on the outer ring and ride against the inner ring shoulder to act as contact seals.
Smooth running
Can accommodate heavy axial loads
Sealed on both sides
Liens connexes
- SKF Bearing Insert 45 mm ID 85 mm OD 1726209-2RS1
- SKF 61909-2RS1 1 Row Ball Bearing - 45 mm ID, 68 mm OD
- SKF 62209-2RS1 1 Row Ball Bearing - 45 mm ID, 85 mm OD
- SKF 6209-2RS1 1 Row Ball Bearing - 45 mm ID, 85 mm OD
- SKF 6009-2RS1 1 Row Ball Bearing - 45 mm ID, 75 mm OD
- SKF 6309-2RS1 1 Row Ball Bearing - 45 mm ID, 100 mm OD
- SKF 1726310-2RS1 1 Row Insert Ball Bearing - 50 mm ID, 110 mm OD
- SKF 1726308-2RS1 1 Row Insert Ball Bearing - 40 mm ID, 90 mm OD
