SKF 1726308-2RS1 1 Row Insert Ball Bearing - 40 mm ID, 90 mm OD
- N° de stock RS:
- 585-899
- Référence fabricant:
- 1726308-2RS1
- Fabricant:
- SKF
Sous-total (1 paquet de 20 unités)*
844,27 €
(TVA exclue)
1 021,57 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 14 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 844,27 € | 42,214 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 585-899
- Référence fabricant:
- 1726308-2RS1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Insert Ball Bearing | |
| Inside Diameter | 40mm | |
| Outside Diameter | 90mm | |
| Race Width | 23mm | |
| Ball Material | Steel | |
| Cage Material | Non-Metallic | |
| End Type | Open | |
| Number of Rows | 1 | |
| Static Load Rating | 24kN | |
| Dynamic Load Rating | 41kN | |
| Bore Type | Cylindrical | |
| Standards/Approvals | RoHS Compliance | |
| Limiting Speed | 5000rpm | |
| Bearing Type | Insert Ball Bearing | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Insert Ball Bearing | ||
Inside Diameter 40mm | ||
Outside Diameter 90mm | ||
Race Width 23mm | ||
Ball Material Steel | ||
Cage Material Non-Metallic | ||
End Type Open | ||
Number of Rows 1 | ||
Static Load Rating 24kN | ||
Dynamic Load Rating 41kN | ||
Bore Type Cylindrical | ||
Standards/Approvals RoHS Compliance | ||
Limiting Speed 5000rpm | ||
Bearing Type Insert Ball Bearing | ||
- Pays d'origine :
- IT
The SKF Insert bearings are based on sealed deep groove ball bearings. These insert bearings are suitable for applications where smooth running is a key operational parameter. It can accommodate heavier axial loads than any other insert bearing. The bearings are sealed on both sides, made of sheet steel reinforced NBR, and are fitted in a recess on the outer ring and ride against the inner ring shoulder to act as contact seals.
Smooth running
Can accommodate heavy axial loads
Sealed on both sides
Liens connexes
- SKF Bearing Insert 50 mm ID 90 mm OD 1726210-2RS1
- SKF 6308-2RS1 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- SKF 6308-2RS1/C3 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- SKF 6308-2RS1/C4 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- SKF 6308-2RS1/C3GJN 1 Row Ball Bearing - 40 mm ID, 90 mm OD
- SKF 61814-2RS1 1 Row Ball Bearing - 70 mm ID, 90 mm OD
- SKF 6018-2RS1 1 Row Ball Bearing - 90 mm ID, 140 mm OD
- SKF 62210-2RS1 1 Row Ball Bearing - 50 mm ID, 90 mm OD
