FAG 695-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 13 mm OD
- N° de stock RS:
- 312-894
- Référence fabricant:
- 695-2Z-HLC
- Fabricant:
- FAG
Sous-total (1 paquet de 10 unités)*
113,34 €
(TVA exclue)
137,14 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 12 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 113,34 € | 11,334 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 312-894
- Référence fabricant:
- 695-2Z-HLC
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Deep Groove Ball Bearing | |
| Inside Diameter | 5mm | |
| Outside Diameter | 13mm | |
| Race Width | 4mm | |
| Race Material | Bearing Steel | |
| Cage Material | Steel Sheet Metal | |
| Ball Material | Steel | |
| End Type | Shielded | |
| Number of Rows | 1 | |
| Internal Clearance | CN | |
| Static Load Rating | 430N | |
| Dynamic Load Rating | 1.08N | |
| Bore Type | Cylindrical | |
| Series | 695-2Z-HLC | |
| Standards/Approvals | RoHS | |
| Limiting Speed | 63rpm | |
| Bearing Type | Single Row Deep Groove Ball | |
| Race Type | Deep Groove | |
| Flange Outside Diameter | 13mm | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Deep Groove Ball Bearing | ||
Inside Diameter 5mm | ||
Outside Diameter 13mm | ||
Race Width 4mm | ||
Race Material Bearing Steel | ||
Cage Material Steel Sheet Metal | ||
Ball Material Steel | ||
End Type Shielded | ||
Number of Rows 1 | ||
Internal Clearance CN | ||
Static Load Rating 430N | ||
Dynamic Load Rating 1.08N | ||
Bore Type Cylindrical | ||
Series 695-2Z-HLC | ||
Standards/Approvals RoHS | ||
Limiting Speed 63rpm | ||
Bearing Type Single Row Deep Groove Ball | ||
Race Type Deep Groove | ||
Flange Outside Diameter 13mm | ||
- Pays d'origine :
- CN
Schaeffler 695-2Z-HLC Series Deep Groove Ball Bearing, 5mm Bore Diameter, 13mm Outside Diameter - 695-2Z-HLC
This deep groove ball bearing is designed to support radial and axial loads in rotating assemblies where sealed operation and grease lubrication are required. It incorporates non-contact shields on both sides and a steel sheet-metal cage, offering maintenance‑friendly performance across a broad temperature range and standard internal clearance for typical industrial duty.
Features and Benefits:
• Steel sheet-metal cage reduces risk of cage deformation
• Sealed both sides prevents external contamination ingress
• Normal internal clearance CN allows controlled radial play
• Grease-filled for lifetime lubrication and low upkeep
• Rated dynamic load 1,080 N supports continuous radial stresses
• Operating temperature range −30°C to 120°C enables varied environments
• Sealed both sides prevents external contamination ingress
• Normal internal clearance CN allows controlled radial play
• Grease-filled for lifetime lubrication and low upkeep
• Rated dynamic load 1,080 N supports continuous radial stresses
• Operating temperature range −30°C to 120°C enables varied environments
Applications
• Suitable for Compact electric motors and small drives
• Ideal for precision instrumentation rotating shafts
• Used with handheld power tools requiring sealed bearings
• Can be used for conveyor idler rollers in light industry
• Used for hobbyist robotics and small automation axes
• Ideal for precision instrumentation rotating shafts
• Used with handheld power tools requiring sealed bearings
• Can be used for conveyor idler rollers in light industry
• Used for hobbyist robotics and small automation axes
What shaft and housing shoulder limits must be observed?
Minimum shaft shoulder diameter is 6.4 mm and maximum housing shoulder diameter is 11.6 mm.
How does the bearing perform at elevated temperatures?
Dimensional stability of rings is maintained up to 120°C and lubricant suitability extends operation to that limit.
What are the load ratings relevant to fatigue and static conditions?
The fatigue load limit is 17.5 N and the Basic static radial load rating is 430 N.
What rotational speed capability does it offer?
The limiting speed is 63,000 rpm for applications within the specified lubrication and temperature range.
Liens connexes
- FAG 689-2Z-HLC 1 Row Deep Groove Ball Bearing - 9 mm ID, 17 mm OD
- FAG 685-2Z-HLC 1 Row Deep Groove Ball Bearing - 5 mm ID, 11 mm OD
- FAG 694-2Z-HLC 1 Row Deep Groove Ball Bearing - 4 mm ID, 11 mm OD
- FAG 61808-2Z-HLC 1 Row Deep Groove Ball Bearing - 40 mm ID, 52 mm OD
- FAG 684-2Z-HLC 1 Row Deep Groove Ball Bearing - 4 mm ID, 9 mm OD
- FAG 61903-2Z-HLC 1 Row Deep Groove Ball Bearing - 17 mm ID, 30 mm OD
- FAG 683-2Z-HLC 1 Row Deep Groove Ball Bearing - 3 mm ID, 7 mm OD
- FAG 61805-2Z-HLC 1 Row Deep Groove Ball Bearing - 25 mm ID, 37 mm OD