Schneider Electric Auxiliary Contact, 1 Contact, 1 CO, A9N, DIN Rail, 6 A, 250V, A9N26904

Voir la catégorie

Sous-total (1 unité)*

50,04 €

(TVA exclue)

60,55 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 6 unité(s) prête(s) à être expédiée(s)
  • Plus 44 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +50,04 €

*Prix donné à titre indicatif

N° de stock RS:
272-7434
Référence fabricant:
A9N26904
Fabricant:
Schneider Electric
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Schneider Electric

Product Type

Auxiliary Contact

Number of Contacts

1

Normal State Configuration

1 CO

Series

A9N

Mount Type

DIN Rail

Contact Current

6A

Terminal Type

Screw Clamp

Contact Voltage

250V

Minimum Operating Temperature

-25°C

Mounting Location

Left

Rated Insulation Voltage Ui

500V

Operational Current Ie

6A

Maximum Operating Temperature

70°C

Standards/Approvals

EN/IEC 60947-5-1 GB/T 14048.5

Pays d'origine :
BE

Schneider Electric A9N Series Auxiliary Contact, 6A Operational Current, 250V Contact Voltage - A9N26904


This auxiliary contact provides an add-on signalling contact for industrial control equipment, designed to clip onto DIN rails and Interface with circuit-breaker or contactor assemblies on the left side. It is intended to monitor switching status and feed control or indication circuits across low-voltage installations, working within typical automation and electrical distribution environments.

Features & Benefits


• 1CO contact composition for single-circuit status signalling
• Rated operational current up to 6A for broad load compatibility
• Screw clamp terminals allow secure bottom-entry wiring
• Rated insulation voltage 500V for enhanced dielectric separation
• Operates from -25 to 70 °C for wide ambient conditions
• Compact 9mm width saves panel space

Applications


• Suitable for status feedback on contactors in motor control panels
• Ideal for integration into distribution board auxiliary circuits
• Used with automation relays for machine safety interlocks
• Can be used for PLC input signalling in industrial control racks

What Terminal types and conductor sizes are supported for connections?


Bottom-entry screw clamps accept 0.5 to 2.5mm² single conductors or 1.5mm² flexible conductors, including ferruled cables, tightened to 1 N·m.

How does the contact perform across different voltages?


It carries 0.1 to 6A depending on voltage and type, supporting AC up to 250V and specified reduced current ratings at higher AC and DC voltages.

What mechanical mounting options exist for panel fitting?


The unit clips onto a DIN rail and locates on the left side of the host device to align with comb busbar and distribution Block arrangements.

Which environmental protections and standards apply?


It meets IP20 protection, pollution degree 3, and conforms to EN/IEC 60947-5-1 and equivalent standards for signal contacts.

What packaging or handling information is relevant for procurement?


It is supplied as a single-piece pack with larger cartons holding 12 and pallet quantities up to 108, each unit weighing approximately 37 g.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.