Zerynth MOD-M1-01-F016 3.6 V WiFi Module, 802.11 b/g/n

Voir l’ensemble des Wi-Fi Modules
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
N° de stock RS:
220-8451
Référence fabricant:
MOD-M1-01-F016
Fabricant:
Zerynth
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Zerynth

Product Type

WiFi Module

Supported Security Standards

No

Frequency

2412MHz

Height

3.1mm

Length

25.5mm

Minimum Supply Voltage

3.6V

Width

18 mm

Maximum Supply Voltage

3.6V

Transmitting Supply Current

500mA

Minimum Operating Temperature

-40°C

Supported Protocols

802.11 b/g/n

Maximum Operating Temperature

85°C

Standards/Approvals

No

Series

MOD-M1-01-F016

Pays d'origine :
IT
The TOI - Things On Internet ZM1 Module mounts on-board the ESP32-D0WD microcontroller, and is designed to be scalable and adaptive. The CPU clock frequency is adjustable from 80 MHz to 240MHz. The chip also has an embedded 16 MB of SPI Flash memory and integrates a rich set of peripherals, ranging from Hall sensors, Capacitive touch sensor, SD interface, Ethernet, High speed SPI, UART, I2S e I2C. Inside the ZM1, the crypto element ATECC608A from Microchip has been integrated to handle secure connections in an easy manner, exchanging certificates and keys, encrypting messages over TLS protocol and using secure authentication procedures.

448 KB of ROM for booting and core functions

520 KB of on-chip SRAM for data and instructions

8 KB of SRAM in RTC used for data storage it is accessed by the main CPU during RTC Boot from the Deep-sleep mode

8 KB of SRAM in RTC accessed by the co-processor during the Deep-sleep mode

1 Kbit of eFuse: 256 bits are used for the system (MAC address and chip configuration) and the remaining

768 bits are reserved for customer applications, including flash-encryption and chip-ID

Liens connexes