- N° de stock RS:
- 533-4207
- Référence fabricant:
- 906T12BNBGN
- Fabricant:
- Curtis
13 En stock, livraison sous 1 jour(s) (stock Europe)
197 En stock, livraison sous 3 à 5 jours (stock Europe)
Ajouté
Prix la pièce
67,10 €
(TVA exclue)
81,19 €
(TVA incluse)
Unité | Prix par unité |
1 - 4 | 67,10 € |
5 - 9 | 65,09 € |
10 + | 62,41 € |
- N° de stock RS:
- 533-4207
- Référence fabricant:
- 906T12BNBGN
- Fabricant:
- Curtis
Documentation technique
Législations et de normes
Statut RoHS non applicable
- Pays d'origine :
- CN
Détails du produit
Curtis LED Battery Meter
The Curtis 12VDC LED battery meter is an inexpensive, 1-piece, easy to install battery fuel gauge. Completely in solid-state, it provides a reliable, accurate, and easy to read display of battery state-of-charge. It has two reset methods Open Circuit Reset (OCR) upon reconnection to the battery when cell voltage =2.09V and High Voltage Reset (HVR)when unit measures 2.35V/cell for 6 continuous minutes. The model 906 is available in 6-panel mount packages and a printed circuit board mounted module for custom dash panel applications.
Features and Benefits
10-bar LED displays the state-of-charge successively
70% depth of discharge, a flashing LED signals an energy reserve alert
80%, alternately flashing LEDs provides an empty status warning
Key switch activated LED display (state-of-charge is monitored as long as 906 is connected to the battery)
Memory allows the gauge to recall state-of-charge whenever the battery is disconnected
Model 906 is compact and easily installed in panel cut-outs as small as 36.8mm x 24.1mm, with as little as 35mm behind panel clearance needed, see dimensions of various case styles
Principal circuits are integrated into a single chip for long-life reliability
Recognizes improperly charged battery
70% depth of discharge, a flashing LED signals an energy reserve alert
80%, alternately flashing LEDs provides an empty status warning
Key switch activated LED display (state-of-charge is monitored as long as 906 is connected to the battery)
Memory allows the gauge to recall state-of-charge whenever the battery is disconnected
Model 906 is compact and easily installed in panel cut-outs as small as 36.8mm x 24.1mm, with as little as 35mm behind panel clearance needed, see dimensions of various case styles
Principal circuits are integrated into a single chip for long-life reliability
Recognizes improperly charged battery
Spécifications
Attribut | Valeur |
---|---|
Display Type | LED |
Cutout Height | 31.2mm |
Cutout Width | 53.2mm |
Depth | 28.8mm |
Meter Type | Battery Meter |
- N° de stock RS:
- 533-4207
- Référence fabricant:
- 906T12BNBGN
- Fabricant:
- Curtis