Microchip 1 Voltage Supervisor 3-Pin SOT-23, MCP130T-450I/TT
- N° de stock RS:
- 738-6477P
- Référence fabricant:
- MCP130T-450I/TT
- Fabricant:
- Microchip
Sous-total 10 unités (conditionné en bande continue)*
4,54 €
(TVA exclue)
5,49 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 18 450 unité(s) expédiée(s) à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 + | 0,454 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 738-6477P
- Référence fabricant:
- MCP130T-450I/TT
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Open Drain, Active Low | |
| Mount Type | Surface | |
| Package Type | SOT-23 | |
| Pin Count | 3 | |
| Monitored Voltage | 4.37V | |
| Minimum Operating Temperature | -40°C | |
| Reset Active Time | 700ms | |
| Maximum Operating Temperature | 85°C | |
| Series | MCP130 | |
| Standards/Approvals | No | |
| Height | 0.95mm | |
| Length | 2.9mm | |
| Minimum Supply Voltage | 1V | |
| Automotive Standard | No | |
| Maximum Supply Voltage | 5.5V | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Open Drain, Active Low | ||
Mount Type Surface | ||
Package Type SOT-23 | ||
Pin Count 3 | ||
Monitored Voltage 4.37V | ||
Minimum Operating Temperature -40°C | ||
Reset Active Time 700ms | ||
Maximum Operating Temperature 85°C | ||
Series MCP130 | ||
Standards/Approvals No | ||
Height 0.95mm | ||
Length 2.9mm | ||
Minimum Supply Voltage 1V | ||
Automotive Standard No | ||
Maximum Supply Voltage 5.5V | ||
- Pays d'origine :
- TH
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 ms (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current