Texas Instruments 1 Precision Monitor 3-Pin 2.7 V SOT-23
- N° de stock RS:
- 268-3618
- Référence fabricant:
- TLV803RDBZT
- Fabricant:
- Texas Instruments
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 268-3618
- Référence fabricant:
- TLV803RDBZT
- Fabricant:
- Texas Instruments
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Texas Instruments | |
| Sub Type | Voltage Supervisor | |
| Product Type | Precision Monitor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Active Low | |
| Mount Type | Surface | |
| Package Type | SOT-23 | |
| Pin Count | 3 | |
| Reset Threshold Voltage | 2.7V | |
| Reset Active Time | 200ms | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 2.92mm | |
| Standards/Approvals | RoHS | |
| Series | TLV8x3 | |
| Automotive Standard | No | |
| Maximum Supply Voltage | 6V | |
| Minimum Supply Voltage | 1.1V | |
| Sélectionner tout | ||
|---|---|---|
Marque Texas Instruments | ||
Sub Type Voltage Supervisor | ||
Product Type Precision Monitor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Active Low | ||
Mount Type Surface | ||
Package Type SOT-23 | ||
Pin Count 3 | ||
Reset Threshold Voltage 2.7V | ||
Reset Active Time 200ms | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 2.92mm | ||
Standards/Approvals RoHS | ||
Series TLV8x3 | ||
Automotive Standard No | ||
Maximum Supply Voltage 6V | ||
Minimum Supply Voltage 1.1V | ||
The Texas Instruments voltage supervisor is a TLV8x3 family which provides circuit initialization and timing supervision, primarily for DSPs and processor based systems. These devices output a logic low whenever VDD drops below the negative going threshold voltage. The output, RESET remains low for approximately 200 ms after the VDD voltage exceeds the positive going threshold voltage. These devices are designed to ignore fast transients on the VDD pin.
Precision supply voltage monitor
Power on reset generator with
Fixed delay time of 200 ms
Pin for Pin Compatible with MAX803
Open drain RESET Output
Liens connexes
- Texas Instruments 1 Precision Monitor 3-Pin 2.7 V SOT-23, TLV803RDBZT
- Texas Instruments 1 Voltage Monitor 6-Pin 5 V SOT-23
- Texas Instruments 1 Voltage Monitor 6-Pin 5 V SOT-23, TPS3702CX12DDCT
- Texas Instruments Precision Precision Voltage Reference 0.65 % 3-Pin SOT-23
- Texas Instruments Precision Precision Voltage Reference 0.65 % 3-Pin SOT-23, LM4040C25MDBZTEP
- Texas Instruments Fixed Precision Voltage Reference 0.01 % SOT-23-6
- Texas Instruments Fixed Precision Voltage Reference 0.01 % SOT-23-6, REF3225AIDBVT
- Texas Instruments Precision Series Voltage Reference 0.2 % 3-Pin SOT-23
