Microchip Low Voltage Supervisory Circuit with Watchdog 6-Pin 4.6 V DFN
- N° de stock RS:
- 244-9848P
- Référence fabricant:
- MIC826TYMT-TR
- Fabricant:
- Microchip
Offre groupée disponible
Consulter les options de prix de grosSous-total (50 unités, conditionné en bande continue)*
18,50 €
(TVA exclue)
22,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- Plus 4 350 unité(s) expédiée(s) à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 50 - 475 | 0,37 € |
| 500 - 975 | 0,356 € |
| 1000 - 2475 | 0,35 € |
| 2500 + | 0,343 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 244-9848P
- Référence fabricant:
- MIC826TYMT-TR
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Low Voltage Supervisory Circuit with Watchdog | |
| Sub Type | Low Voltage Supervisory Circuit with Watchdog | |
| Watchdog Timer | Yes | |
| Manual Reset | Yes | |
| Power Fail Detection | Yes | |
| Output Driver | CMOS | |
| Mount Type | Surface | |
| Package Type | DFN | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| Reset Active Time | 140ms | |
| Reset Threshold Voltage | 4.6V | |
| Maximum Operating Temperature | 125°C | |
| Series | MIC826 | |
| Width | 1.6mm | |
| Standards/Approvals | RoHS | |
| Length | 1.6mm | |
| Height | 0.5mm | |
| Minimum Supply Voltage | 1V | |
| Maximum Supply Voltage | 5V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Low Voltage Supervisory Circuit with Watchdog | ||
Sub Type Low Voltage Supervisory Circuit with Watchdog | ||
Watchdog Timer Yes | ||
Manual Reset Yes | ||
Power Fail Detection Yes | ||
Output Driver CMOS | ||
Mount Type Surface | ||
Package Type DFN | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
Reset Active Time 140ms | ||
Reset Threshold Voltage 4.6V | ||
Maximum Operating Temperature 125°C | ||
Series MIC826 | ||
Width 1.6mm | ||
Standards/Approvals RoHS | ||
Length 1.6mm | ||
Height 0.5mm | ||
Minimum Supply Voltage 1V | ||
Maximum Supply Voltage 5V | ||
Automotive Standard No | ||
The microchip microprocessor reset circuit MIC826 is a low-current, ultra-small, voltage supervisor with manual reset input, watchdog timer, and active-high and active-low push-pull outputs. The reset outputs are asserted and held when the supply voltage falls below the factory-programmed threshold voltage, when the /MR pin is pulled low, or if the watchdog times out. Reset is asserted for the reset timeout delay after the supply voltage increases above the rising threshold voltage or when manual reset input is asserted high. The microprocessor features an integrated pull-up resistor on the /MR. An active-low push-pull reset output (/RESET) and an active-high reset output (RESET) provide flexibility when interfacing with various microcontrollers, PMICs, or load switches. The watchdog input can be left unconnected for applications that do not require watchdog monitoring.
It is manual reset input
The reset timeout period 140ms (min.)
The watchdog timeout period 1.6s
Float watchdog timer input to disable watchdog timer
It is active-high and active-low push-pull outputs
Guaranteed reset output valid to VCC = 1V
Precision value is 1.8V to 5V power supply monitor