STMicroelectronics 1 Voltage Supervisor 3-Pin 2.95 V SOT-23
- N° de stock RS:
- 196-2013P
- Référence fabricant:
- STM1061N29WX6F
- Fabricant:
- STMicroelectronics
Sous-total 25 unités (conditionné en bande continue)*
7,925 €
(TVA exclue)
9,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 425 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 25 + | 0,317 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 196-2013P
- Référence fabricant:
- STM1061N29WX6F
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Voltage Supervisor | |
| Sub Type | Low Power Voltage Detector | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Active Low, Open Drain | |
| Mount Type | Surface | |
| Package Type | SOT-23 | |
| Pin Count | 3 | |
| Monitored Voltage | 1.6V | |
| Minimum Operating Temperature | -40°C | |
| Reset Threshold Voltage | 2.95V | |
| Maximum Operating Temperature | 85°C | |
| Series | STM1061 | |
| Height | 1.12mm | |
| Length | 3.04mm | |
| Standards/Approvals | No | |
| Minimum Supply Voltage | 0.7V | |
| Maximum Supply Voltage | 6V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Voltage Supervisor | ||
Sub Type Low Power Voltage Detector | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Active Low, Open Drain | ||
Mount Type Surface | ||
Package Type SOT-23 | ||
Pin Count 3 | ||
Monitored Voltage 1.6V | ||
Minimum Operating Temperature -40°C | ||
Reset Threshold Voltage 2.95V | ||
Maximum Operating Temperature 85°C | ||
Series STM1061 | ||
Height 1.12mm | ||
Length 3.04mm | ||
Standards/Approvals No | ||
Minimum Supply Voltage 0.7V | ||
Maximum Supply Voltage 6V | ||
Automotive Standard No | ||
- Pays d'origine :
- MY
The STM1061 low power voltage detector provides monitoring of battery, power-supply, and regulated system voltages. A precision voltage reference and comparator monitors the VCC input and compares it with a specified voltage threshold condition. When VCC falls below a specified trip point threshold, the output (OUT ) is forced low and remains asserted as long as the VCC input remains below VTH– + hysteresis (VHYST). The STM1061 device is guaranteed to output the correct logic state for VCC down to 0.7V. They are also designed to ignore fast transients on VCC.
This small, low power device is ideal for portable applications and is available in spacesaving SOT23-3 and SOT323-3 (SC70-3) packages.