Maxim Integrated 1 Voltage Supervisor 4-Pin SOT-223, DS1233DZ-15+
- N° de stock RS:
- 190-5532
- Référence fabricant:
- DS1233DZ-15+
- Fabricant:
- Maxim Integrated
Sous-total (1 paquet de 5 unités)*
5,78 €
(TVA exclue)
6,995 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En voie de retrait du marché
- 165 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 1,156 € | 5,78 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-5532
- Référence fabricant:
- DS1233DZ-15+
- Fabricant:
- Maxim Integrated
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Maxim Integrated | |
| Sub Type | Microprocessor Power Supply Supervisor | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOT-223 | |
| Pin Count | 4 | |
| Minimum Operating Temperature | -40°C | |
| Reset Active Time | 450ms | |
| Maximum Operating Temperature | 85°C | |
| Length | 6.7mm | |
| Height | 1.8mm | |
| Standards/Approvals | No | |
| Width | 3.7mm | |
| Series | DS1233D | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1.2V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Maxim Integrated | ||
Sub Type Microprocessor Power Supply Supervisor | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection Yes | ||
Mount Type Surface | ||
Package Type SOT-223 | ||
Pin Count 4 | ||
Minimum Operating Temperature -40°C | ||
Reset Active Time 450ms | ||
Maximum Operating Temperature 85°C | ||
Length 6.7mm | ||
Height 1.8mm | ||
Standards/Approvals No | ||
Width 3.7mm | ||
Series DS1233D | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1.2V | ||
Automotive Standard No | ||
The DS1233D EconoReset uses a precision temperature-compensated reference and comparator circuit to monitor the status of the power supply (VCC). When an out-of-tolerance condition is detected, an internal power-fail signal is generated, which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signal is kept in the active state for approximately 350ms to allow the power supply and processor to stabilize.
Automatically restarts microprocessor after power failure
Maintains reset for 350ms after VCC returns to an in-tolerance condition
Accurate 5%, 10%, or 15% microprocessor 5V power supply monitoring
Reduces need for discrete components
Precision temperature-compensated voltage reference and voltage sensor
Low-cost TO-92 package or surface mount SOT-223 package
Internal 5k pullup resistor
Compatible with Motorola 68XXX series and HC16 Microprocessors
Operating temperature of -40°C to +85°C
Liens connexes
- Maxim Integrated 1 Voltage Supervisor 4-Pin SOT-223
- Maxim Integrated 1 Voltage Supervisor 3-Pin SOT-223, DS1233AZ-15+
- Maxim Integrated 1 Voltage Supervisor 4-Pin SOT-223, DS1233Z-10+T&R
- Maxim Integrated 1 Voltage Supervisor 8-Pin SOT-23
- Maxim Integrated 1 Voltage Supervisor 8-Pin SOT-23, MAX6371KA+T
- Maxim Integrated 1 Voltage Supervisor 8-Pin SOT-23, MAX6374KA+T
- Maxim Integrated 1 Voltage Supervisor 4-Pin 3.08 V SOT-23
- Maxim Integrated 1 Voltage Supervisor 4-Pin 4.75 V SOT-23