Microchip 1 Voltage Supervisor 3-Pin TO-92
- N° de stock RS:
- 144-5867
- Référence fabricant:
- MCP130-450FI/TO
- Fabricant:
- Microchip
Sous-total (1 sachet de 1000 unités)*
478,00 €
(TVA exclue)
578,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 28 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 1000 + | 0,478 € | 478,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 144-5867
- Référence fabricant:
- MCP130-450FI/TO
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Voltage Supervisor | |
| Number of Supervisors | 1 | |
| Watchdog Timer | No | |
| Manual Reset | No | |
| Power Fail Detection | No | |
| Output Driver | Open Drain, Active Low | |
| Mount Type | Through Hole | |
| Package Type | TO-92 | |
| Pin Count | 3 | |
| Minimum Operating Temperature | -40°C | |
| Monitored Voltage | 4.37V | |
| Maximum Operating Temperature | 85°C | |
| Series | MCP130 | |
| Length | 4.95mm | |
| Standards/Approvals | No | |
| Height | 3.94mm | |
| Automotive Standard | No | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Supply Voltage | 1V | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Voltage Supervisor | ||
Number of Supervisors 1 | ||
Watchdog Timer No | ||
Manual Reset No | ||
Power Fail Detection No | ||
Output Driver Open Drain, Active Low | ||
Mount Type Through Hole | ||
Package Type TO-92 | ||
Pin Count 3 | ||
Minimum Operating Temperature -40°C | ||
Monitored Voltage 4.37V | ||
Maximum Operating Temperature 85°C | ||
Series MCP130 | ||
Length 4.95mm | ||
Standards/Approvals No | ||
Height 3.94mm | ||
Automotive Standard No | ||
Maximum Supply Voltage 5.5V | ||
Minimum Supply Voltage 1V | ||
- Pays d'origine :
- TH
MCP130 Microcontroller Supervisory and Reset Circuit
The Microchip MCP130 is a Voltage Supervisor that holds a Microcontroller or other device in Reset during under-voltage conditions. During Start-Up and Brownout events the MCP130 asserts a Reset signal via an active-low Reset Pin. Integrated into the MCP130 is an internal 5 kΩ Pull-Up Resistor.
Features
Holds Microcontroller in Reset until supply voltage reaches stable operating level
Resets Microcontroller during power loss
Active low RESET pin
Open drain output
Internal 5 kΩ Pull-Up Resistor
Holds RESET for 350 MS (typical)
RESET to VCC = 1.0V
Accuracy of ±125 mV for 5V systems, ±75 mV for 3V systems over temperature
45 μA typical operating current
Supervisory & Reset Circuits - Microchip
Liens connexes
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-450FI/TO
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-475DI/TO
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP130-450DI/TO
- Microchip 1 Voltage Supervisor 3-Pin TO-92, MCP120-300DI/TO
- Microchip 1 Voltage Supervisor 3-Pin 4.5 V TO-92
- Microchip 1 Voltage Supervisor 3-Pin 3.08 V TO-92
- Microchip MCP111-315E/TO TO-92
- Microchip 1 Voltage Supervisor 3-Pin 4.5 V TO-92, TC32MCZB