Microchip, 1-Channel Low Dropout Voltage, Voltage Regulator, 50 mA, 5V, SOT-23 5-Pin
- N° de stock RS:
- 264-8858P
- Référence fabricant:
- TC1054-5.0VCT713
- Fabricant:
- Microchip
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 264-8858P
- Référence fabricant:
- TC1054-5.0VCT713
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Voltage Regulator | |
| Regulator Type | Low Dropout Voltage | |
| Output Voltage | 5V | |
| Number of Outputs | 1 | |
| Line Regulation | 0.35 % | |
| Load Regulation | 0.5 % | |
| Package Type | SOT-23 | |
| Output Current | 50mA | |
| Pin Count | 5 | |
| Power Rating | 20.7mW | |
| Output Type | Fixed | |
| Series | TC1054 | |
| Length | 3.2mm | |
| Width | 3.1mm | |
| Standards/Approvals | RoHS | |
| Height | 1.45mm | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Minimum Input Voltage | 2.7V | |
| Maximum Input Voltage | 6.5V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Voltage Regulator | ||
Regulator Type Low Dropout Voltage | ||
Output Voltage 5V | ||
Number of Outputs 1 | ||
Line Regulation 0.35 % | ||
Load Regulation 0.5 % | ||
Package Type SOT-23 | ||
Output Current 50mA | ||
Pin Count 5 | ||
Power Rating 20.7mW | ||
Output Type Fixed | ||
Series TC1054 | ||
Length 3.2mm | ||
Width 3.1mm | ||
Standards/Approvals RoHS | ||
Height 1.45mm | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Minimum Input Voltage 2.7V | ||
Maximum Input Voltage 6.5V | ||
Automotive Standard No | ||
The Microchip high accuracy CMOS LDO is an upgrades for older (bipolar) low dropout regulators. Designed specifically for battery-operated systems, the devices’ CMOS construction eliminates wasted ground current, significantly extending battery life. The key features include ultra low noise operation, very low dropout voltage and fast response to step changes in load. An error output (ERROR) is asserted when the devices are out-of-regulation (due to a low input voltage or excessive output current). ERROR can be used as a low battery warning or as a processor RESET signal (with the addition of an external RC network).
Low ground current for longer battery life
High output voltage accuracy
Power-saving shutdown mode
ERROR output can be used as a low battery detector, or processor reset generator
Over-current and over-temperature protection
Pin compatible upgrades for bipolar regulators