Maxim Integrated MAX17693AATC+, Converter 60V TDFN 12-Pin
- N° de stock RS:
- 223-6112
- Référence fabricant:
- MAX17693AATC+
- Fabricant:
- Maxim Integrated
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
12,06 €
(TVA exclue)
14,595 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 5 | 2,412 € | 12,06 € |
| 10 - 20 | 2,152 € | 10,76 € |
| 25 - 45 | 2,036 € | 10,18 € |
| 50 - 95 | 1,994 € | 9,97 € |
| 100 + | 1,81 € | 9,05 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 223-6112
- Référence fabricant:
- MAX17693AATC+
- Fabricant:
- Maxim Integrated
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Maxim Integrated | |
| Product Type | Converter | |
| Package Type | TDFN | |
| Mount Type | Surface | |
| Polarity | Positive | |
| Quiescent Current | 10mA | |
| Pin Count | 12 | |
| Length | 3.1mm | |
| Series | MAX17693A | |
| Standards/Approvals | No | |
| Height | 0.8mm | |
| Maximum Input Voltage | 60V | |
| Maximum Operating Temperature | 125°C | |
| Minimum Input Voltage | 4.5V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Maxim Integrated | ||
Product Type Converter | ||
Package Type TDFN | ||
Mount Type Surface | ||
Polarity Positive | ||
Quiescent Current 10mA | ||
Pin Count 12 | ||
Length 3.1mm | ||
Series MAX17693A | ||
Standards/Approvals No | ||
Height 0.8mm | ||
Maximum Input Voltage 60V | ||
Maximum Operating Temperature 125°C | ||
Minimum Input Voltage 4.5V | ||
Automotive Standard No | ||
The Maxim Integrated MAX17693A/B are high efficiency No-Opto integrated misfit flyback converters that use fixed frequency peak current mode control. The device senses the isolated output voltage directly from the primary-side flyback waveform during the secondary-side rectifier conduction. No secondary-side error amplifier and optocoupler are required to provide an accurate, isolated, regulated output voltage, saving up to 20% of PCB space normally required for a traditional flyback converter.
Reduces external components and total cost
Reduces power dissipation
Supports key system-level design requirements
Operates reliably in adverse environments