onsemi, 1-Channel Buck, Boost, Voltage Regulator 65 kHz, TSOP 6-Pin
- N° de stock RS:
- 221-6611
- Référence fabricant:
- NCL37733BSNT1G
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 221-6611
- Référence fabricant:
- NCL37733BSNT1G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Regulator Type | Buck, Boost | |
| Product Type | Voltage Regulator | |
| Number of Outputs | 1 | |
| Switching Frequency | 65kHz | |
| Mount Type | Surface | |
| Polarity | Positive | |
| Package Type | TSOP | |
| Pin Count | 6 | |
| Output Type | Fixed | |
| Switching Regulator | No | |
| Standards/Approvals | RoHS | |
| Series | NCL37733 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Minimum Input Voltage | 2V | |
| Maximum Input Voltage | 12V | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Regulator Type Buck, Boost | ||
Product Type Voltage Regulator | ||
Number of Outputs 1 | ||
Switching Frequency 65kHz | ||
Mount Type Surface | ||
Polarity Positive | ||
Package Type TSOP | ||
Pin Count 6 | ||
Output Type Fixed | ||
Switching Regulator No | ||
Standards/Approvals RoHS | ||
Series NCL37733 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Minimum Input Voltage 2V | ||
Maximum Input Voltage 12V | ||
Automotive Standard No | ||
The ON Semiconductor NCL37733 is a compact driver for power−factor corrected flyback and non−isolated buck−boost and SEPIC converter. The controller operates in a quasi−resonant mode to provide optimal efficiency, and embeds a proprietary control method which allows the LED current to be tightly regulated from the primary side, thus eliminating the need for a secondary−side feedback circuitry and for an optocoupler.
Near−unity power factor (>0.95 typically)
Optimized for line wide−range application
Line feed forward for enhanced regulation accuracy
Low start−up current (10 A typ.)
Wide VCC range