Carroll & Meynell Auto-Transformer, 3 Phase 4.2 kVA, 415 V
- N° de stock RS:
- 122-6778
- Référence fabricant:
- MVT4.2k/5A-3
- Fabricant:
- Carroll & Meynell
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
640,47 €
(TVA exclue)
774,97 €
(TVA incluse)
- N° de stock RS:
- 122-6778
- Référence fabricant:
- MVT4.2k/5A-3
- Fabricant:
- Carroll & Meynell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Carroll & Meynell | |
| Product Type | Auto-Transformer | |
| Primary Voltage | 415 V | |
| Operation Type | Manual | |
| Electrical Phase | 3 | |
| Power | 4.2kVA | |
| Termination Type | Clamp | |
| Width | 180mm | |
| Diameter | 646mm | |
| Length | 160mm | |
| Depth | 646mm | |
| Standards/Approvals | No | |
| Construction | Open | |
| Minimum Operating Frequency | 50Hz | |
| Maximum Operating Frequency | 60Hz | |
| Number of Phases | 3 | |
| Sélectionner tout | ||
|---|---|---|
Marque Carroll & Meynell | ||
Product Type Auto-Transformer | ||
Primary Voltage 415 V | ||
Operation Type Manual | ||
Electrical Phase 3 | ||
Power 4.2kVA | ||
Termination Type Clamp | ||
Width 180mm | ||
Diameter 646mm | ||
Length 160mm | ||
Depth 646mm | ||
Standards/Approvals No | ||
Construction Open | ||
Minimum Operating Frequency 50Hz | ||
Maximum Operating Frequency 60Hz | ||
Number of Phases 3 | ||
- Pays d'origine :
- TR
Carroll & Meynell 3 Phase Vairiable Transformers
Carroll & Meynell 3 phase transformers provide a trouble free and efficient way of varying and controlling AC voltages. Variation of the output voltage is achieved by a rotating arm and a carbon brush that rolls around a winding commutator.
These 3 phase variable autotransformers consist of three single phase variacs that are mounted on a common shaft and connected in the “star” vector configuration. The variacs are positioned so that the brush arms on each unit are matched.
This new range of autotransformers uses round carbon brushes, riding out any imperfection which gives a smoother operation. The round Carbon brush should last the lifetime of the unit.
Features
High Efficiency. No Waveform Distortion. Excellent Regulation
Centre tap in winding for buck-boost applications
Rugged Construction. Low Operating Torque. Smooth and Linear Output
Low current density in round carbon brush. Low Magnetising Current.
Variable Auto Transformers
Continuously variable alternating current (a.c.) output voltage
Rugged construction
Low operating torque
High efficiency/excellent regulation
Silver-plated commutator
Low magnetising current
No waveform distortion, smooth linear output & overload capacity
Screw terminals
Complete with knob and dial
Liens connexes
- Carroll & Meynell Auto-Transformer 415 V
- Carroll & Meynell Auto-Transformer 415 V
- Carroll & Meynell Auto-Transformer 415 V
- Carroll & Meynell 30 kVA Auto-Transformer 415 V 380 V 415 V Secondary
- Carroll & Meynell Enclosed 10 kVA Auto-Transformer 415 V 415 V 380 V Secondary
- Carroll & Meynell Variac 1 Phase 1.4 kVA, 240 V
- Carroll & Meynell DMC 3 kVA Auto-Transformer 114.1 V ac Secondary
- Carroll & Meynell Auto-Transformer 1 Phase 1350 VA, 240 V