Festo Pneumatic 2 Port Actuated Ball Valve - Actuator

Voir l’ensemble des Valve Actuators
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau en stock, il n'est plus vendu par le fabricant.
N° de stock RS:
271-7844
Référence fabricant:
VZBC-80-FF-16-22-F07-V4V4T-PS180-R-90-4-C
Fabricant:
Festo
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Festo

Product Type

Actuated Ball Valve

Number of Ports Supported

2

Actuator Type

Pneumatic

Function

Actuator

Standards/Approvals

ATEX, ISO 8573-1:2010

Model Number

1915409

Pays d'origine :
DE

Festo Actuated Ball Valve, Pneumatic Actuator, 2 Ports Supported - VZBC-80-FF-16-22-F07-V4V4T-PS180-R-90-4-C, Numeric Part Number:1915409


This actuated ball valve provides automated flow control using a pneumatic semi-rotary drive, designed for inline installation in systems handling compressed air, inert gases and NEUTRAL fluids. It operates across a wide media temperature range and is suitable for applications requiring explosion-protected equipment within specified ambient conditions.

Features and Benefits:


• 2-way design offers straightforward on/off flow control
• Pneumatic actuation enables Rapid switching at 6 bar-8.4 bar
• DN80 porting delivers high throughput with Kv905 m³/h
• High-alloy stainless-steel body resists dense corrosion environments
• PTFE-reinforced Seals permit media temperatures up to 200 °C
• ATEX-certified assembly allows use in Zones 1/2/21/22

Applications


• Suitable for compressed Air distribution systems in plants
• Ideal for hazardous-area pneumatic valve automation
• Used with NEUTRAL fluids and inert gas handling trains
• Can be used for high-flow process line isolation tasks
• Suitable for systems requiring lubricated pilot operation

What explosion protection classifications does it meet?


It is certified for Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas.

Which materials are used for wetted components?


The ball and housing are high-alloy stainless steel with PTFE-based seals.

What operating medium quality is required?


Compressed Air conforming to ISO 8573-1:2010 is specified for operation.

What ambient temperature limits apply to the assembly?


The assembly is rated for use between −10 °C and +80 °C.

Is lubricated operation acceptable and when required?


Lubrication is permissible and, if used, becomes a permanent requirement.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.