RS PRO Pressure Switch NC 0.2 bar to 2.5 bar
- N° de stock RS:
- 880-2299
- Fabricant:
- RS PRO
Sous-total (1 unité)*
135,48 €
(TVA exclue)
163,93 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 10 unité(s) expédiée(s) à partir du 09 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 135,48 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 880-2299
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Pressure Switch | |
| Minimum Operating Pressure | 0.2bar | |
| Port Size | 1/4 in | |
| Switch Output | NO, NC | |
| Current | 500mA | |
| Contact Configuration | NC | |
| Suitable Medias | Fluid | |
| Mount Type | Any Position | |
| Voltage | 250V ac | |
| Series | RS PRO | |
| Maximum Operating Pressure | 2.5 bar | |
| Connection Thread Standard | G | |
| Minimum Operating Temperature | -25°C | |
| Port Gender | Male | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | ANSI, EN, RoHS, DIN | |
| IP Rating | IP65 | |
| Hazardous Area Certification | No | |
| LED Indicator | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Pressure Switch | ||
Minimum Operating Pressure 0.2bar | ||
Port Size 1/4 in | ||
Switch Output NO, NC | ||
Current 500mA | ||
Contact Configuration NC | ||
Suitable Medias Fluid | ||
Mount Type Any Position | ||
Voltage 250V ac | ||
Series RS PRO | ||
Maximum Operating Pressure 2.5 bar | ||
Connection Thread Standard G | ||
Minimum Operating Temperature -25°C | ||
Port Gender Male | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals ANSI, EN, RoHS, DIN | ||
IP Rating IP65 | ||
Hazardous Area Certification No | ||
LED Indicator No | ||
- Pays d'origine :
- IT
RS PRO Pressure Switch, 1/4 BSP Male, 0.2 bar to 2.5 bar
This RS PRO pressure switch connects to a standard male 1/4 inch British Standard Pipe (BSP) socket and has a microswitch that closes when a specific pressure is reached. You can easily set the appropriate triggering pressure by adjusting a screw on the rear of the assembly.
The switch's in-built mechanical stop ensures the system is protected if any over-pressurisation occurs, though it's recommended to keep your system under 2.5 bar. Its sensor housing has an IP65 rating, which means it's suitable for all-weather outdoor use but not for immersion in water.
For added versatility, the microswitch can be used as either a normally open or normally closed switch. Thanks to its 10% hysteresis, it reduces switch bounce on the output signal to prevent multiple triggers.
Features and Benefits
Liens connexes
- RS PRO Pressure Switch NC 0.2 bar to 2.5 bar
- RS PRO Pressure Switch 0.2 bar to 4 bar
- RS PRO Pressure Switch 0.2 bar to 2 bar
- RS PRO Pressure Switch NC 1 bar to 10 bar
- RS PRO Pressure Switch NC 1 bar to 12 bar
- RS PRO Pressure Switch NC 30 bar to 250 bar
- RS PRO Pressure Switch NC 30 bar to 300 bar
- RS PRO Pressure Switch NC 50 bar to 400 bar