SICK Pressure Switch 0 bar to 10 bar

Sous-total (1 unité)*

162,26 €

(TVA exclue)

196,33 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s)
  • Plus 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 2 unité(s) expédiée(s) à partir du 11 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +162,26 €

*Prix donné à titre indicatif

N° de stock RS:
100-0679
Référence fabricant:
PAC50-DGD / 1062986
Fabricant:
SICK
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

SICK

Product Type

Pressure Switch

Minimum Operating Pressure

0bar

Switch Output

PNP, NPN, Push Pull

Suitable Medias

Air

Mount Type

DIN Rail

Pressure Type

Positive Pressure

Voltage

30V dc

Series

PAC50

Maximum Operating Pressure

10 bar

Minimum Operating Temperature

0°C

Port Gender

Female

Connection Thread Standard

G, Metric

Maximum Operating Temperature

60°C

Standards/Approvals

IEC/EN

Depth

35mm

Width

35mm

Height

63mm

IP Rating

IP67, IP65

Hazardous Area Certification

No

LED Indicator

Yes

Pays d'origine :
TH

PAC50 Pressure Switches


The SICK PAC50 pressure switch provides an easy to read overview of important system information using a clear bi colour display. Simple to programme making commissioning fast and easy, the PAC50 provides up to 2 switch outputs and an extra analogue output in a rugged casing.

Switched outputs can be programmed to be NPN, PNP or push-pull. Analogue inputs automatically detect whether a voltage or current signal is required simplifying installation and reducing stocking cost.

Features and Benefits


Integrated pressure switch, transmitter and display

Clear simultaneous display of applied pressure and set points

Colour change when set points are reached

3 large push buttons

DIN rail or panel mounting (via accessory)

Standard M12 electrical connection

PIF connection or 2 x G1/4” female (1 on rear, 1 on bottom)

Switch outputs configurable PNP, NPN, Push-pull. IO Link V1.1.

Analogue outputs configurable 4-20mA / 0-10V

Pressure ranges available -1 to 0 Bar, -1 to +1 Bar, 0 to 6 Bar, 0-10 Bar

Set-up and Installation


Installation and set-up of the PAC50 is fast and easy with no tools required for programming. Mounting is done using the integrated DIN Rail Mounting on the back or with the panel and wall mounting kit available separately (1000682).

Set-up and commissioning are done by using the three buttons on the front panel. Use the arrow keys to navigate the menu and the middle key to select the required parameter. Then simply use the arrow keys and adjust to the required set point before saving by using the middle key. Your PAC50 is now ready for operation.

Applications


The PAC50 is suitable for use with both positive pressure and vacuum systems in a range of applications including pneumatic control systems, vacuum grippers and cylinder pressure regulation.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.