SMC for use with ZK2 Series Vacuum Ejectors Vacuum Generator

This vacuum generator is a compact, single-unit pneumatic ejector designed to create and control vacuum levels within automated systems. It integrates a two-stage ejector with dual pilot-operated valves and an onboard digital pressure switch, providing a self-contained solution for pick-and-place, handling and vacuum supply tasks in industrial automation and electronics applications.

• Maximum vacuum achievable -91 kPa for deep suction performance
• Standard supply pressure 0.35 MPa enabling stable operation
• Air consumption 40 l/min to control system airflow demands
• Switch output 2 PNP channels with 80 mA max load for direct control
• Set pressure range −105 to 105 kPa with 0.1 kPa resolution for fine tuning
• Noise level 66 dB to reduce acoustic impact in workcells

• Suitable for component pick-and-place in electronics assembly
• Ideal for end-of-arm tooling on robotic handlers
• used with vacuum cups for part transfer in production lines
• Can be used for leak testing in small pneumatic assemblies
• Suitable for retrofit vacuum generation in automation equipment

It runs from a protected 12 to 24VDC supply with ±10% tolerance and reverse-connection protection.

The digital display is a 3½-digit red LED with 0.1 kPa increments and indicator LEDs showing OUT1 as green and OUT2 as red.

Operate between −5 and 50 °C with 35 to 85% RH and avoid condensation or freezing.

It withstands vibration up to 20 m/s² and impact forces up to 100 m/s².